Advertisement
Fig 28: Manual Mode
To display Pump B faults, use the instructions as above, but
press
NOTE
5.4 Pump Running Hours Display
The controller displays the pump(s) accumulated running hours. To view this, ensure the
pump(s) is not running. Press the
and hold the
This will display the current fault for Pump A, Fig 30.
Fig 30: Manual Mode
To display Pump B run hours, use the instructions as above,
but press
NOTE
5.5 Communication Link and Remote Monitoring
Smartcon 2 comes with an inbuilt communication interface (Modbus RS485) that can
be used to integrate the controller to external Building Management Systems or iDayliff
IoT. Please contact Dayliff for more information on the integration.
instead
key to switch to manual mode as per Fig 29. Press
key and
key simultaneously until the controller make a sound.
instead
Failure
Icon
Fig 29: The last failure of Pump A
.
Time Icon
Fig 31: Runs hours for Pump A
.
4 19
S/N of Failure
Failure Sequence
Number
Advertisement
