DAYLIFF SMARTCON 2 Installation & Operating Manual page 9

4. INSTALLATION & WIRING
All installation and/or maintenance must be done by a
qualied electrician in observance of the relevant electrical
and safety standards.
CAUTION
Ensure the power specications for the motor and controller
match.
CAUTION
Before any installation or maintenance operation, the
controller must be disconnected from the power supply.
CAUTION
The installation of a safety switchgear is recommended to
protect the panel power line in compliance with current
electrical and safety standards.
CAUTION
Install the equipment far from heat sources and in a dry and
sheltered location in observance of the stated protection
rating (IP). Avoid areas with mechanical shock, corrosive
DANGER
gases and liquids, extreme heat and cold, salt mist corrosion,
rain and moisture and ammable materials.
No parts of the panel must be disassembled without the
ofcial authorization. Any tampering with or modications
to the unit will render all terms of the warranty null and void.
DANGER
Ensure the installation is connected to an efcient earthing
system. After making the electrical connection, check that all
electrical panel settings are correct to avoid automatic start-
DANGER
up of the electric pump.
To prevent equipment damage, refrain from making random
changes to the dip switch parameters of the controller.
DANGER
5