Advertisement
Fig 23: Emptying Mode with Float Switches at Source Tank
Auto Patrol (Anti-rust) Function
Auto Patrol function is a pump shaft antirust protection that helps protect the drainage /
sewage pump from rust and the impeller being jammed due to extended periods of
inactivity.
In Auto Mode, if the SmartCon Controller detects that both pumps have been inactive
for 10 days, each pump will be run for 3 seconds and then stopped, with a 10-second
Low water in the Sump
Overflow in Sump
NO WATER
Fig 24: Meaning of Messages and Graphic on LCD
4 16
Advertisement
