General Problems Or Technical Faults - Miele DGC 7840 HC Pro Operating And Installation Instructions

Steam combination oven
Hide thumbs Also See for DGC 7840 HC Pro:
Table of Contents

Advertisement

Problem solving guide

General problems or technical faults

Problem
You cannot switch on
steam combination
oven.
The oven lighting
doesn't come on.
The control panel will
not open or close
automatically despite
the  sensor being
touched several times.
172
Possible cause and remedy
The circuit breaker has tripped.
 Reset the circuit breaker in the mains fuse box (see
data plate for minimum fuse rating).
There may be a technical fault.
 Disconnect the steam combination oven from the
mains connection for approximately 1 minute by:
– switching off at the wall socket and withdrawing
the plug, or
– switching off the mains circuit breaker or
residual current device.
 If, after switching the circuit breaker or residual
current device back on, the steam combination
oven will still not switch on, contact a qualified
electrician or Miele.
The lamps need to be replaced.
 Call Miele to have the lamps replaced.
Something is obstructing the control panel.
 Remove the obstruction.
The obstruction sensor is very sensitive, which means
the control panel sometimes does not open or close.
 Open/close the control panel manually (see end of
this section).
 If the problem occurs frequently, contact Miele.

Advertisement

Table of Contents
loading

Table of Contents