Control - Acclaim Lighting Terra Drum User Manual

CONTROL

Terra Drum fixtures use DMX as their native control method, however, it is possible to use
other common control protocols when required, such as 0-10V (source or sink) or DALI.
CONTRO L IN PUTS VIA CON VER TERS
• DMX - connect a DMX input directly into the feed cable.
• 0-10V - use an Acclaim Lighting ZDM 6 (or similar) to convert one or more analog control
feeds into a combined DMX feed¹.
• DALI - use an Acclaim Lighting DDC-1-AC (or similar) to convert one or more DALI
channels into a combined DMX feed¹.
0-10V IN
DMX IN
DALI IN
NOT ES :
¹ When using Acclaim Lighting ZDM 6 or DDC-1-AC modules it is possible to convert up to six
0-10V feeds or up to 64 DALI channels into separate DMX channels within a consolidated feed -
thus allowing multiple Terra Drum fixtures to be uniquely addressed.
USI NG SIN GL E COLOR MODE LS WITH OUT CONT R OL
Terra Drums with single color white emitters default to 100% output when a control input
is not present. Static, full brightness installations can be achieved without need for a control
input, with the fixtures going straight to 100% output whenever power is applied.
Mains power
(100-277VAC)
18
ZDM 6
DMX
DMX
DDC-1-AC
DMX
Mains power
(100-277VAC)
www.acclaimlighting.com