Table of Contents
Advertisement
IN-GROU N D INSTALL ATION
The following section provides a brief overview of the recommended steps required to
successfully install a Terra Drum fixture.
TORX T20 SECURITY D RIVER
In addition to other standard tools required to complete the installation, you will also require
a Torx T20 Security driver for the final fixing screws and also for making fine tilt adjustments
to the head angle once the fixture is in place.
TO INSTALL A T ERR A DRUM F IXTU RE
1 Prepare the mounting location(s) - see "Mounting" on page 5.
2 Remove the pour cover from the sleeve
as well as one or two of the 2" rubber
knockout(s).
Note: If fine tilt adjustment will be required
after installation, ensure the sleeve is
correctly orientated to allow the tilt axis
of the Terra Drum to align with the object
being illuminated. See page 11.
8
Sleeve
2" knockout
Pour cover
www.acclaimlighting.com
Advertisement
Table of Contents
