Installation; Bending Flex Tubes - Acclaim Lighting Flex Tube Mini User Manual

INSTALLATION

BENDING FLEX TUBES

Flex Tubes are designed to be bent in one axis only -
to a minimum bend radius of 3.93" (100mm):
IMPORTANT
Do not twist; or bend in the
wrong direction. Damage will be
caused to the internal circuitry.
FMA MODELS
Horizontal bend only
Minimum
bend radius:
3.93" (100mm)
FMB MODELS
Vertical bend only
Minimum
bend radius:
3.93" (100mm)
4
www.acclaimlighting.com