Table of Contents
Advertisement
Dead Battery
All hands and the day indicator are stopped.
Charging Time Guidelines
●
The table below shows guidelines for
approximate charging times.
Charging Times Required for 1 Day of
Operation
Light Intensity Approximate Charging Time
8 minutes
A
High
30 minutes
B
p
48 minutes
C
Low
8 hours
D
Charge Recovery Times
Approximate Charging Time
Light Intensity
Charge Level
1
2 hours
A
High
5 hours
B
p
8 hours
C
Low
77 hours
D
Charge Level 1 :
Time from dead battery until watch operation
starts.
Charge Level 2 :
Time from watch operation start until a full
charge.
Light Intensity
Sunny day, outdoors (50,000 lux)
A
Sunny day, near a window (10,000 lux)
B
Overcast day, near a window (5,000 lux)
C
Indoor fluorescent lighting (500 lux)
D
Note
Actual charging time depends on the
●
charging environment, watch settings,
and other factors.
Watch Operation Guide 5636
Power Saving
●
If the watch is not moved for about one hour,
the connection with your phone will be
terminated and the watch will enter Level 1
power saving.
Also, leaving the watch in a dark location for
about one hour between the hours of 9 p.m.
and 6 a.m. will cause the second hand to stop,
and the watch will enter Level 2 power saving.
If the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 3 power saving.
Level 1 :
Except for communication with a phone,
watch functions are operational.
Level 2 :
Basic timekeeping functions are operational.
Level 3 :
Only the day indicator is operational.
Note
Note that the watch also may enter the
●
power saving state if its face is blocked
Charge Level
from light by your sleeve while you are
2
wearing it.
22 hours
The watch will enter power saving
●
when it is in one of the modes below.
80 hours
Calendar Mode
ー
128 hours
Stopwatch Mode (reset to all zeros)
ー
-
Timer Mode (timer start time
ー
displayed)
Recovering from Power Saving
●
Operation
Use one of the operations below to exit
●
power saving.
Press any button.
ー
Perform some crown operation.
ー
Angle the watch towards your face.
ー
To go from Level 2 or Level 3 power saving
●
to Level 1 power saving, place the watch in
a brightly lit location.
Viewing the Face in the Dark
The watch has an LED light that you can use
to illuminate the display for about three
seconds for viewing in the dark. When turned
on, illumination becomes gradually brighter
and then gradually dimmer.
Turning On Illumination
●
Pressing (B) turns on the light.
Illumination will turn off automatically if an
●
alarm starts to sound.
Illumination is disabled while the hands are
●
moving at high speed.
The light may flicker when it turns on or off.
●
Useful Features
Pairing the watch with your phone makes a
number of the watch's features easier to use.
Auto time adjustment
Auto Time Adjustment
l
5
Advertisement
Table of Contents
