Useful Features; Linking With A Phone; Getting Ready - Casio Edifice EQB-1200D-2AER Operation Manual

Useful Features

Pairing the watch with your phone makes a
number of the watch's features easier to use.
Auto time adjustment
Auto Time Adjustment
l
Selection of More Than 300 World Time
cities
Configuring World Time Settings
l
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.

Getting Ready

l
Your phone needs to have the CASIO
●
"EDIFICE Connected" app installed to pair
with the watch.
Watch Operation Guide 5666

Linking with a Phone

While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch's current time setting is adjusted
automatically. You can also change the
watch's other settings.
Note
This function is available only while
●
EDIFICE Connected is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the required app on your
●
A
phone.
In Google Play or the App Store, search for the
CASIO "EDIFICE Connected" app and install
it on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Pair the watch with a phone.
●
C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "EDIFICE Connected" icon.
3. Y
Perform the operation shown on the
screen of the phone to be paired with.
If your phone is already paired with a
●
watch, tap , tap the item for
connecting with a new watch, and then
tap this watch's name.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
About two seconds after pairing starts,
●
the second hand will point to [R]. When
pairing is complete, the second hand
will move to .
e
Note
The first time you start up EDIFICE
●
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
10