Page 1
To ensure a strong and stable Wi-Fi connection install the included Wi-Fi antenna. The antenna must be mounted on the back of the Hybrid stove. A brass threaded rod will be available, to screw the antenna onto: Hybrid app Wi-Fi setup...
Page 2
Revision date: 25.10.2023 The stove setup will then be presented right away. If the app has been used before, or another stove needs to be connected, the wizard can be accessed in the function menu: The setup wizard will be presented, click on start to continue to the next screen. Here the stoves serial number and password need to be entered.
Page 3
If this fails, the phone will tell you to do it manually. To connect manually exit the Hybrid app and go to Exit the Hybrid app, and open the settings the phone settings, then head to the Wi-Fi section:...
Page 4
Revision date: 25.10.2023 Select the Wi-Fi name that matches the stove’s Select the Wi-Fi name that matches the stove’s serial number and connect: serial number and connect: Return to the app and click on the “Connect” button. Click on the button “Setup Wi-Fi”: The stove will start to search for available Wi-Fi connections.
Revision date: 25.10.2023 Enter Wi-Fi password and press “Continue”. The stove will now try to connect to the Wi-Fi: If the connection was successful, the following screen will appear. To finish the setup, press the “Finish and Swap to [Your Wi-Fi name]” button. The main screen will then appear with the stove that has been connected showing: Troubleshooting Wi-Fi is not showing up:...
Page 6
Revision date: 25.10.2023 Phone cannot connect to the stove: • Make sure that location data is allowed for the app: • Restart the phone and app. • Restart the stove. • Reinstall the app, and make sure that the newest version is installed. The newest version can be found in the phone’s app store.