ADURO Hybrid Series How-To

How to reset and reinstall firmware on the stove's control board

Hide thumbs Also See for Hybrid Series:

Download this manual

Revision date: 03.05.2024

How to reset and reinstall firmware on the hybrid stove's control

board

Difficulty level: Intermediate

Time consumption: 15 minutes

Tools: TORX 25 screwdriver

Components: Micro-SD card with firmware (get firmware from Aduro costumer service)

NB: All changes and adjustments must be conducted when the stove is cold and disconnected from

the power supply.

Resetting the firmware to stock (factory)

To reset the firmware of the control board, please follow these instructions:

1. Disconnect the stove from the power supply.

2. Open the stove's lower door and unscrew the plate on the lower left side:

3. Gently pull out the metal plate holding the control board while making sure not to damage the board

and cables. Place the board on the floor so it lays down with the green side facing up.

Need help?

Do you have a question about the Hybrid Series and is the answer not in the manual?

Page 1 Difficulty level: Intermediate Time consumption: 15 minutes Tools: TORX 25 screwdriver Components: Micro-SD card with firmware (get firmware from Aduro costumer service) NB: All changes and adjustments must be conducted when the stove is cold and disconnected from the power supply.
Page 2 6. The stove’s firmware has now been reset. Manually installing firmware on the control board: Firmware can only be acquired directly from Aduro. Please contact customer service to acquire the latest version. The firmware comes packaged in a zip file, containing files similar to this: 1.
Page 3 7. The stove’s firmware has now been installed. Updating the stove It is recommended to reconnect the stove to the Aduro Hybrid app and let the app update the stove. You will find a guide on how to do this here.