Table of Contents
Related Manuals for True RESIDENTIAL TR-42
Summary of Contents for True RESIDENTIAL TR-42
- Page 1 T R U E R E S I D E N T I A L ® T H E T R U E 4 2 / 4 8 I N S T A L L G U I D E A N D U S E R ' S M A N U A L "...
- Page 2 ☐ Is the unit operating correctly? If not, is the unit plugged in? Is the control turned on? * To be completed by either an installer with the customer or an authorized True dealer upon completion of installation. Stainless steel doors, handles, and shelves are covered by a limited 30-day warranty for cosmetic defects.
-
Page 3: Table Of Contents
C O N T E N T S SAFETY INFORMATION & OWNERSHIP CABINET SETUP REFRIGERANT SAFETY & WARNING SHELVING, DOOR BINS & DRAWERS INFORMATION REFIRGERATOR STORAGE BASIC SAFETY & WARNING PRECAUTIONS FREEZER STORAGE CABINET DISPOSAL WARNING ICEMAKER OWNERSHIP REFRIGERATOR / FREEZER OPERATION NOTICE TO CUSTOMER BASIC ELECTRONIC CONTROL OPERATIONS REGISTER YOUR PRODUCT... - Page 4 T H E T R U E 4 2 / 4 8 TR-42SBS-SS-C TR-48SBS-SG-SS-C STAINLESS SOLID DOOR STAINLESS SOLID DOOR L U X URY R EF R IG ER AT ION W I T H C OMMER CI A L DN A . Page 4 of 64 T RUE RE S ID E N TI A L ®...
-
Page 5: Safety Information & Ownership
S A F E T Y I N F O R M A T I O N & O W N E R S H I P R E F R I G E R A N T S A F E T Y & W A R N I N G I N F O R M A T I O N B A S I C S A F E T Y &... -
Page 6: Refrigerant Safety & Warning Information
S A F E T Y I N F O R M A T I O N & O W N E R S H I P WARNING! Use this appliance for its BA SIC SAFE T Y & WARNING PREC AU TIONS intended purpose as described in this Installation Manual. -
Page 7: Cabinet Disposal Warning
S A F E T Y I N F O R M A T I O N & O W N E R S H I P P A G E T I T L E • DO NOT store explosive substances such as aerosol C ABINE T DISP OSAL WARNING cans with a flammable propellant in this appliance. -
Page 8: Ownership
7–12 year parts-only sealed system recommend a trained refrigeration mechanic and warranty, you must register your electrician install your True equipment. The cost of a product* within 12 months of the professional installation is money well spent. unit’s installation date. To register... -
Page 9: Prior To Installation
P R I O R T O I N S T A L L A T I O N S I T E P R E P A R A T I O N A N T I - S W E A T F O A M E N D P A N E L S E L E C T R I C A L S A F E T Y P O W E R C O R D I C E M A K E R R E Q U I R E M E N T S... - Page 10 P R I O R T O I N S T A L L A T I O N ROUG H OPENINGS & PL AN VIEWS T R- 42 / 4 8 – T OP V IE W F L U SH IN S TA L L NO T E: DUE T O T HE W EIGH T O F T HI S UNI T, T RUE R EC OMMEND S C ON SULT ING A F L O O R ING E X P ER T P R IO R T O IN S TA L L AT ION.
- Page 11 P R I O R T O I N S T A L L A T I O N TR-42/48 T R 42 / 4 8 – T OP V IE W F L U SH IN S TA L L 2-3/16 "...
-
Page 12: Anti-Sweat Foam End Panels
P R I O R T O I N S T A L L A T I O N ANTI-SWE AT FOA M END PANEL S When installing two or more True units side-by-side, be sure to leave at least a 5/8” (15.88 mm) gap between... -
Page 13: Electrical Safety
(OEM) plug Circuit Breaker: 15 Amp configuration when connecting it Receptacle: 3-Prong Grounding-Type to a power source. True will not warranty any refrigerator/freezer that has been connected to an • For all built-in models, the electrical supply should adapter plug. - Page 14 S I T E P R E P A R A T I O N P OWER CORD INSTALLATION Fully seat the power cord into the cabinet receptacle until it locks in position. See fig. 1. REMOVAL Depress the red button. See fig. 2. FIG.
-
Page 15: Icemaker Requirements
I N S T A L L A T I O N P A G E T I T L E ICEM AKER REQUIREMENT S WAT ER SUP P LY R EQUIR EMEN T S Units with ice-makers come with 20” (508 mm) of polyethylene tubing with a 1/4”... - Page 16 I N S T A L L A T I O N WAT ER F ILT ER IN S TA L L AT ION & P ER F O R M A NCE DATA The water filter filters sediment and removes unpleasant taste and odor.
- Page 17 I N S T A L L A T I O N WAT ER F ILT ER IN S TA L L AT ION & Filter Specifications P ER F O R M A NCE DATA (C ON T.) Flow Rate 0.5 gpm / 1.89 lpm •...
- Page 18 N O T E S...
-
Page 19: Installation Plan Views
I N S T A L L A T I O N P L A N V I E W S T R - 4 2 S B S - S S - C T R - 4 8 S B S - S G - S S - C TEC_TM_170 REV. -
Page 20: Plan Views
I N S T A L L A T I O N P L A N V I E W S OVER ALL DIMENSIONS – TR-42 T OP V IE W Cabinet Width 41-9/16 " (10556 mm) 23-25/32 " (604 mm) 2-1/2 "... - Page 21 I N S T A L L A T I O N P L A N V I E W S OVER ALL DIMENSIONS – TR-42 F R ON T V IE W 83-31/32 " (2133 mm) 72-21/32 " Door Height (1845 mm) 67-29/32 "...
- Page 22 I N S T A L L A T I O N P L A N V I E W S OVER ALL DIMENSIONS – TR-48 T OP V IE W Cabinet Width 47-9/16 " (1208 mm) 23-25/32 " (647 mm) 2-1/2 "...
- Page 23 I N S T A L L A T I O N P L A N V I E W S OVER ALL DIMENSIONS – TR-48 F R ON T V IE W 20 " Door Height Glass Opening 83-31/32 " 67-29/32 "...
- Page 24 N O T E S...
-
Page 25: Installation
I N S T A L L A T I O N U N C R A T I N G A N T I -T I P B R A C K E T I N S T A L L A T I O N L E V E L I N G T H E U N I T K I C K P L A T E I N S T A L L A T I O N J O I N I N G K I T I N S T A L L A T I O N... - Page 26 M AT CH F IGUR E S SHO W N. P R O CEDUR E 1. Inspect the pallet exterior packaging for visible damage. See fig. 1. Follow TRUE’s recommended procedure for accepting deliveries. FIG. 2. Inspect the unit’s exterior for visible damage.
- Page 27 I N S T A L L A T I O N UNCR ATING (CONT.) 3. Closely inspect the unit’s interior for damage (e.g., scratches by shelving or damage to the door seal). See fig. 5. NO T E: D O NO T R EMO V E T HE IN T ER IO R PA CK A GING.
- Page 28 I N S T A L L A T I O N UNCR ATING (CONT.) 6. Remove the condensate drain pan. Set the drain pan aside. See fig. 9. 7. Slightly raise the rear leveling leg rollers. Turn the front adjustment screw 1/4-1/2 turn clockwise. See fig.
- Page 29 I N S T A L L A T I O N ANTI-TIP BR ACKE T INS TALL ATION PROCEDURE 1. Measure and mark the depth of the bracket’s KIT CONTENTS placement in the installation location. • (1) One anti-tip bracket •...
- Page 30 I N S T A L L A T I O N 42 INCH UNIT T OP V IE W 20 25/32" 528mm 9 9/32" 9 9/32" 236mm 236mm ℄ ℄ ℄ 22 31/32" 24 31/32" 583mm 634mm PROUD INSTALL FLUSH INSTALL ℄...
- Page 31 I N S T A L L A T I O N LE VELING It is important that your unit is level. This ensures the doors align and seal correctly and drain pans do not spill over. PROCEDURE 1. Place a level on the interior floor on the unit. Check the level back-to-front and side-to-side.
-
Page 32: Kickplate Installation
I N S T A L L A T I O N KICKPL ATE INS TALL ATION INSTALLATION After leveling the unit, position the kickplate at the The kickplate (see fig. 1) is shipped unattached to bottom of the unit’s front. See fig. 3. the unit to allow easy access for leveling the unit. -
Page 33: Joining Kit Installation
I N S T A L L A T I O N P A G E T I T L E JOINING KIT INS TALL ATION Kit Sizes: 60" (1524 mm) / 72" (1828.8 mm) / 78" (1981.2 mm) / 90" (2286 mm) K I T C ON T EN T S WARNING! TIP OVER HAZARD. - Page 34 I N S T A L L A T I O N P A G E T I T L E JOINING KIT INS TALL ATION (CONT.) Kit Sizes: 60" (1524 mm) / 72" (1828.8 mm) / 78" (1981.2 mm) / 90" (2286 mm) P R O CEDUR E 1.
- Page 35 I N S T A L L A T I O N P A G E T I T L E JOINING KIT INS TALL ATION (CONT.) Kit Sizes: 60" (1524 mm) / 72" (1828.8 mm) / 78" (1981.2 mm) / 90" (2286 mm) 7.
- Page 36 I N S T A L L A T I O N P A G E T I T L E JOINING KIT INS TALL ATION (CONT.) Kit Sizes: 60" (1524 mm) / 72" (1828.8 mm) / 78" (1981.2 mm) / 90" (2286 mm) 14.
-
Page 37: Cabinet Setup
C A B I N E T S E T U P S H E L V I N G , D O O R B I N S & D R A W E R S R E F R I G E R A T O R S T O R A G E F R E E Z E R S T O R A G E I C E M A K E R ®... -
Page 38: Shelving, Door Bins & Drawers
C A B I N E T S E T U P P A G E T I T L E SHELVING , DO OR BINS & DR AWERS Your TRUE appliance ships with shelving and drawers installed. Door bins ship packaged inside the unit. See fig. 1. - Page 39 C A B I N E T S E T U P P A G E T I T L E D O OR BINS NO T E: BE C AU T IOU S O F P L A CING TA L L I T EM S IN T OP D O O R BIN, A S I T EM S MIGH T IN T ER F ER E W I T H UI C ON T R O L PA NEL .
- Page 40 C A B I N E T S E T U P DR AWERS R EMO VA L 1. Pull the drawer fully forward. 2. Remove the drawer slide screws. See fig. 8. 3. Lift the drawer from the unit. IN S TA L L AT ION 1.
-
Page 41: Freezer Storage
FREE ZER S TOR AG E W IR E SHELV E S Your True appliance ships with shelving installed. Remove interior packaging before use. See fig. 10. A D JU S T MEN T 1. Tilt the shelf front forward. See fig. 11. -
Page 42: Icemaker
C A B I N E T S E T U P ICEM AKER The icemaker (see fig. 1) is in the rear upper left of the freezer section. For water supply requirements, please see “Water Supply Requirements” (page 15). To turn the icemaker on, please see “Ice Menu Navigation”... -
Page 43: Refrigerator / Freezer Operation
R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N T U R N O N / O F F T E M P E R A T U R E A D J U S T M E N T ( Z O N E N A V I G A T I O N ) M O D E N A V I G A T I O N A C C E N T L I G H T I N G S Y S T E M A L A R M N A V I G A T I O N ( D O O R A J A R A L A R M F E A T U R E O N / O F F ) - Page 44 R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N T URN ON/OFF All units are shipped in ON mode. During the initial startup, the unit runs a short power up diagnostic followed by a single audible beep.
-
Page 45: Temperature Adjustment (Zone Navigation)
R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N TEMPER AT URE AD JUS TMENT (ZONE NAVIG ATION) To adjust set-points, press ZONE for the appropriate T HE T EMP ER AT UR E R A NG E IN A R EF R IG ER AT O R Z ONE I S + 3 2 °F (0 °C) T O compartment, then DOWN or UP key on control panel... -
Page 46: Mode Navigation
R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N MODE NAVIG ATION The following pages illustrate unique customer • Freezer defrosting functions will convert to a fixed input operations performed at the control panel. -
Page 47: Accent Lighting System
R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N ACCENT LIG HTING S YS TEM All models are equipped with an accent lighting system illuminated when the door is closed, in the DOOR in the refrigerator and or freezer compartment(s). -
Page 48: Alarm Navigation (Door Ajar Alarm Feature On/Off) 4
R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N AL ARM NAVIG ATION (D OOR A JAR AL ARM FE AT URE ON/OFF) All Residential Series units are equipped with a door notification icons will appear and an audible alarm will ajar alarm feature. -
Page 49: Notification Alerts
R E F R I G E R A T O R / F R E E Z E R O P E R A T I O N NOTIFIC ATION ALERT S The diagrams on these pages illustrate what a customer may see in the LCD if the appliance needs attention. NO T IF IC AT ION A L ER T S 38°F 0°F... -
Page 50: Showroom Mode
R E F R I G E R A T O R / F R E E Z E R O P T I O N S P A G E T I T L E SHOWROOM MODE When in Showroom Mode all cooling and defrosting functions are disabled, but the lighting system and door ajar alarm system remain operational, and the LCD will show the set-points. -
Page 51: Ice Menu Navigation
• Defrost the freezer and clean with soap and water Bad taste • Place co ee grounds or charcoal briquettes in the freezer to absorb odor Clean the condenser coil. Contact True Residential Customer Service if the issue Hollow cubes is unresolved. - Page 52 N O T E S...
-
Page 53: General Maintenance, Care & Cleaning
G E N E R A L M A I N T E N A N C E , C A R E & C L E A N I N G D O O R R E M O V A L D O O R H A N D L E T I G H T E N I N G CO ND ENS ER CO IL CLE ANIN G C O N D E N S A T I O N... - Page 54 G E N E R A L M A I N T E N A N C E , C A R E & C L E A N I N G P A G E T I T L E DO OR REMOVAL R EMO VA L 1.
-
Page 55: Condensation
G E N E R A L M A I N T E N A N C E , C A R E & C L E A N I N G P A G E T I T L E CONDENSER COIL CLE ANING Keeping the condenser coil clean minimizes required servicing and lowers electrical cost. -
Page 56: Water Filter Replacement
G E N E R A L M A I N T E N A N C E , C A R E & C L E A N I N G P A G E T I T L E WATER FILTER REPL ACEMENT The ice machine water has a life expectancy of 300 gal (1,136 L) or six months. -
Page 57: Appliance Care & Cleaning
S TA INL E S S S T EEL OP P ONEN T S TRUE offers environmentally-friendly cleaner and There are three basic things which can break down polish through our True Store at https://store. your stainless steel’s passivity layer and allow corrosion trueresidential.com/products/stainless-steel-clean-... - Page 58 G E N E R A L M A I N T E N A N C E , C A R E & C L E A N I N G P A G E T I T L E APPLIANCE C ARE &...
-
Page 59: Serial Label Location
The serial label is located on the left wall near the freezer wire basket or the refrigerator upper drawer. This label contains important information such as your model name and serial number. Please have this information on hand when contacting True so we can better assist you with your service -or parts- related inquiries. FIG. 1. - Page 60 TRUE and upon proper installation and start-up in accordance with the instruction packet supplied with each TRUE unit. TRUE’s obligation under this warranty is limited to a period of three (3) years from the date of original installation or thirty nine (39) months after shipment date from TRUE, whichever occurs first.
- Page 61 N O T E S...
- Page 62 N O T E S...
- Page 63 N O T E S...
- Page 64 CONTACT US t r u e - r e s i d e n t i a l . c o m 6 3 6 . 2 4 0 . 2 4 0 0 t o l l f r e e 8 8 8 . 6 1 6 . 8 7 8 3 ®...