DR AWERS
R EMO VA L
1. Pull the drawer fully forward.
2. Remove the drawer slide screws. See fig. 8.
3. Lift the drawer from the unit.
IN S TA L L AT ION
1. Pull the drawer slides fully forward.
2. Position the drawer on the drawer slides and
carefully push the drawer towards the back of the
unit.Lift the drawer from the unit.
NO T E: BE SUR E T HE D R AW ER SI T S UND ER
T HE SL ID E S ' R E A R TA B S. SEE F IG. 9.
3. Reinstall the drawer slide screws.
Page 40 of 64
T RUE RE S ID E N TI A L
C A B I N E T S E T U P
FIG. 8.
Drawer slide screw locations.
FIG. 9.
Be sure the drawer sits under the rear tabs.
®
10/18/2023
P# 848062
TEC_TM_170 REV. B