ICP DAS USA ALX-9000 Series User Manual page 33

Step 2: Wiring connection
The metal part of the cord end terminal on the wire can be direct wired to the terminal
of ALX-9000.
1. Use screwdriver to push
the black clip in.
Tips & Warnings
If you do not expand the I/O module full, please keep the top case of the unused slot
to protect the backplane from dirt, dust and damage from foreign objects.
ALX-9000 (Linux based PAC) User Manual
Copyright © 2024 ICP DAS Co., Ltd. All Rights Reserved.
2. Remove the wiring from
the terminal block
Keep on pushing
Remove the wire
version 1.0.0
E-mail: service@icpdas.com
Page: 33