Table of Contents
Advertisement
4.2
Installation Requirements
Applies to wall-mounting installation, as described below in detail.
4.2.1 Determining the installation Position
Basic Requirements
a. The inverter is protected to IP65 and can be installed indoors or outdoors.
b. The installation method and position must be appropriate for the weight and dimensions of the inverter.
c. Do not install the inverter in a place where personnel are likely to contact with its enclosure and heat sinks
because these parts are extremely hot during operation.
d. Do not install the inverter in areas with flammable or explosive materials.
Installation Environment Requirements
a. The ambient temperature must be below 50℃ to ensure the inverter's optimal operation and extend its
service life.
b. The inverter must be installed in a well-ventilated environment for good heat dissipation.
c. The inverter must be free from direct exposure to sunlight, rain, and snow to extend its service life. It is
recommended to install the inverter in a sheltered place. If no shelter is available, install an awning over it,
as shown in Figure 4.2.
Awning
≥500
the front view
Figure 4.2 Installation environment with awning (unit: mm)
12
4 Installation
4 Installation
≥1000
the lateral view
Advertisement
Table of Contents
