Installation; Selecting The Mounting Location - PrimeVOLT PV 5KTL-D3/G2 User Manual

4

Installation

After checking the outer packing, move the PV inverter to the designated installation position horizontally.
CAUTION
DANGER
Inverters have been tested as per AS/NZS 4777.2:2020 for three phase combinations.
4.1

Selecting the Mounting Location

4.1.1 Installation Environment Requirements
a. With an IP66 protection rating, the inverter can be mounted indoors or outdoors.
b. To ensure optimum operation and long service life, the ambient temperature must be below 50℃.
c. Do not install the inverter in a rest area since it will cause noise during operation.
The carrier where the inverter is mounted must be fire-proof. Do not mount the inverter on flammable
d.
building materials.
e. Ensure that the wall meets the requirements of the inverter installation.
f . Product label and warning symbols shall be clear to read after installation.
g. The installation height should be reasonable, and make sure it is easy to operate and view the display.
h. Please avoid direct sunlight, rain exposure, snow cover.
No direct sunlight
Direct sunlight
1. Please place the inverter horizontally on the foam or other soft pads and ensure
that the ports are free of load-bearing pressure to avoid inverter damages or scratches.
2. The inverter is heavy, be careful to prevent the inverter from slipping and hurting
the operator when moving the inverter.
Ensure there is no electronical connections around ports of the PV inverter before
installation.
No rain exposure
Rain exposure Snow cover
No snow cover
08
4 Installation 4 Installation