4 Installation
4 Installation
4
Installation
DANGER
CAUTION
Inverters have been tested as per AS/NZS 4777.2:2020 for three phase combinations.
4.1
Moving the inverter
After checking the outer packing, move the PV inverter to the designated installation position horizontally.
Hold the handles on both sides of the inverter, as shown in Figure 4.2.
CAUTION
Do not install the inverter on flammable building materials or in an area where
flammable or explosive materials are stored.
Do not install the inverter in a place where personnel are likely to come into
contact with its enclosure and heat sinks to avoid electric shock/burn.
Figure 4.1 Moving the inverter
>Do not place the PV inverter with its wiring terminals contacting the floor
because the power ports and signal ports at the bottom of the device are not
designed to support the weight of the inverter.
>When placing the inverter on the floor horizontally, put foam or paper under
to protect its enclosure.
11