Table of Contents
Advertisement
3.2
Storage
This chapter describes the storage requirements for the inverter.
The following storage instructions apply if the PV inverter will not be deployed immediately:
> Do not unpack the inverter (put desiccant in the original box if the PV inverter is unpacked).
> Store the PV inverter at a temperature range of -25℃ to +60℃ and with the relative humidity of 0% to
100% (no condensing).
> The PV inverter should be stored in a clean and dry place and be protected from dust and water vapor
corrosion.
> 2K-3.6K PV Inverter with Single MPPT Input a maximum of eight layers of inverters can be stacked,
4K-6K PV Inverter with Dual MPPT Input a maximum of six layers of inverters can be stacked.
> The inverter packing should be upright.
> Conduct periodic inspection during storage. Replace the packing materials immediately if any rodent bites
are found.
> Ensure that qualified personnel inspect and test the inverter before use if it has been stored for a long time.
3.3
Identify Inverter
Inverter body label. The following is only for reference, specific please in kind prevail!
XXXX-XXXX-XXX
Name:
Product Model:
d.c.Max.Input Voltage:
d.c.MPPT Voltage Range:
d.c.Max.Input Current:
d.c.Shorted Input Current:
a.c.Rated Output Voltage:
a.c.Rated Output Frequency:
a.c.Max.Output Current:
a.c.Rated Output Power:
Max.Apparent Power:
Adjustable Power Factor Range:
Enclosure:
Temperature Range:
Protective Class:
Bar code of the SN number
1
2
3
TUV-026562-E
4
Number Description
1
Product name and model
2
Product technical parameters
3
SN Barcode
4
Approve and Safety identification
10
3 Unpacking and Storage
3 Unpacking and Storage
Advertisement
Table of Contents
