Safety Precautions - PrimeVOLT PV 2KTL-S1/G2P User Manual

1.2

Safety Precautions

1.2.1 Personnel Safety
a. The PV inverter must be installed, electronically connected, operated and maintained through specially
trained technician;
b. The qualified technician must be familiar with the safety regulations of electrical system, working process
of PV power generation system, and standards of local power grid;
c. The technician must read through this User Manual carefully and master it before any operation.
1.2.2 PV Inverter Protection
NOTICE
a. Do not tamper with any warning signs on the inverter the inverter housing as they contain
important information for safe operation.
b. Do not remove or damage the nameplate on the inverter's enclosure because it contains
important product information.
1.2.3 Installation Safety
NOTICE
a. Ensure there is no electrical connections around ports of the PV inverter before installation;
b. Adequate ventilation must be provided for inverter installation location. Mount the inverter in vertical
direction, and ensure that no object is put on the heat sink affecting the cooling. (For details, refer to
Chapter 4 Installation)
c. This inverter must be installed by the ''Australia local agent professional person who authorized by
manufacturer''. This professional person should familiar with Australia relevant electrical regulations to
ensure all installation comply with Electromechanical regulations.
1.2.4 Electrical Connections
DANGER
As soon as receiving the PV inverter, please check if it is damaged during its
transportation. If yes, please contact your dealer immediately.
Please read the User Manual carefully before installing the PV inverter; warranty or
liability will be exempted from the company if damage is caused by installation
faults.
Before installing the inverter, check all electrical ports to ensure no damage and no
short circuit. Otherwise personal casualty and/or fire will occur.
02
1 Safety 1 Safety