Installing The Inverte R - PrimeVOLT PV 2KTL-S1/G2P User Manual

4 Installation 4 Installation
4.4
Installing the PV Inverter
Follow below procedures:
Step 1 Hold the handles at both sides of the inverter and then lift and stand the inverter.
Step 2 Mount the inverter on the rear panel and keep them aligned with each other, as shown in Figure 4.13.
Step 3 Tighten the two hexagon screws at both sides of the inverter to a torque of 1.2N·m and 3N·m
respectively. Screw specs for 2K-3.6K and 4K-6K are M4 and M6 respectively, as shown in Figure 4.13.
Mount on the rear panel Tighten the screws at both sides
Figure 4.13 Securing the inverter
18