Table of Contents
Advertisement
Drain Tap Installation
1. Before assembling the components of the drain tap, wet the gaskets of the drain
tap (Fig. 38) and the gaskets (Fig. 40) with water.
2. Install the drain tap spring and pin as shown in Figures 38 and 39.
EN
28 / 32
Fig. 38
Fig. 40
Fig. 39
3. When inserting the drain tap pin,
make sure that the small hole (see
Fig. 40) is directly in front of you.
4. Wet the pin of the drain cock with
plenty of water before installing it.
Cleaning
135022
Advertisement
Table of Contents
