Table of Contents
Advertisement
Adjusting the slushie consistency
The machine has been factory set to
'normal' for making slushies.
1. For milk or other products that require
a longer time to freeze, change the
setting to 'medium' or 'maximum' by
turning the adjusting wheel (a) in the
"+" direction as shown in Fig. 3.
Switching-On
EN
1. Plug the device into a suitable single socket.
2. Switch the ON/OFF switch (A, Fig. 4) to the
'I'position.
3. Turn the spindle on/off switches (E) for tank 1
and (G) for tank 2 to the 'I'position.
4. Switches (B), (D) and (F) turn to the "I"
position to activate the cooling/freezing mode.
5. If necessary, switch the LED lighting switch
(C) to the 'I'position to illuminate the tanks.
LED lighting is located under the covers of the
tanks.
16 / 32
Installation and operation
Fig. 3
Fig. 4
135022
Advertisement
Table of Contents
