Camera Assembly; Operating The Device - Xblitz S8 User Manual

05. CAMERA ASSEMBLY

CAMERA ASSEMBLY MANUAL
1. Pick a spot to place your camera. It is best to place your camera in a place that
makes as much space in front of the vehicle as possible visible on the display screen.
Make sure that the camera will not obscure the driver's line of sight when driving.
2. Mount the holder on the windshield and then place the camera in the holder.
3. Place the USB cable as shown in the picture above.
4. Connect the miniUSB plug to the camera.
5. Connect the charger to the 12V lighter socket.

06. OPERATING THE DEVICE

1. Mount the camera and connect it to the power supply
2. Put in a microSD memory card, formatted to FAT32 file system.
WARNING!
The card should be put in and take out only when the device is turned o .
The manufacturer does not guarantee compatibility with all micro SD cards
on the market. A list of recommended cards can be found at www.Xblitz.pl
in the S8 tab.
LIGHTER SOCKER
20