Remote Control In Zone 2 - Yamaha RX-V3300 Owner's Manual

ZONE 2
I Special considerations when
using DTS software
The DTS signal is a digital bitstream. Therefore, if you
attempt to send the DTS signal to the second room, you
will only be able to hear the digital noise sound that could
damage your speakers.
Due to this characteristic of DTS encoded discs, the
following considerations and adjustments need to be
made.
For LDs or DVDs encoded with DTS
Only 2-channel analog audio signals may be sent to the
second room, as follows:
• LDs
Set your LD player's left and right outputs to the
analog soundtrack.
• DVDs
Use the disc menu to set the DVD player's mixed 2-
channel left and right audio outputs to the PCM or
Dolby Digital soundtrack.
For CDs encoded with DTS
DO NOT USE the Zone 2 feature for CDs encoded with
DTS to avoid unexpected noise.

Remote Control in Zone 2

In the second room (Zone 2), the supplied remote control
can be used for the Zone 2 remote control. You can select
the input source and control the component which is
located in the main room directly from the second room
regardless of the listening condition in the main room.
Before starting the following procedure, set REC OUT/
ZONE 2 on the front panel to SOURCE/REMOTE.
1
Repeat steps 1 and 2 of the procedure in
"Setting the Manufacturer Code" on page 47.
2
Press l / h to select "L:AMP".
ENTER
3
Press k / n to select "Zone2".
ENTER
4
Press LEARN to complete the Zone 2 setup.
LEARN
76
5
Press SOURCE SELECT k to display
"Zone2" in the display window.
SOURCE
SELECT
6
Press an input selector button to select the
input source you want to listen to in the
second room.
The display window shows "2: name of selected
input" if the remote control is in the Zone 2 mode.
SYSTEM
STANDBY
POWER
*
V-AUX TUNER
D-TV/LD CBL/SAT
* The SYSTEM POWER and STANDBY button on the remote
control works for the second room.
7
You can control the component by using the
component control area buttons.
SOURCE
DISPLAY
SELECT
SEARCH
POWER REC
10KEY DSP HALL 1
1
ROCK
CONCERT
5
MOVIE
EX/ES THEATER 1
9
CHP/INDEX
A/B/C/D/E
TV INPUT
TV VOL
TV MUTE
8
Press SOURCE SELECT k / n to exit from
the Zone 2 mode.
SOURCE
SELECT
PHONO
MD/TAPE CD-R CD
VCR 1 VCR2/DVR DVD
6CH INPUT
TITLE
ENTER
MENU SOUND
– +
CHAPTER
STOP PAUSE PLAY
HALL 2 CHURCH JAZZ CLUB
2 3 4
ENTER- MUSIC TV
TAINMENT VIDEO THEATER
6 7 8
MOVIE /DTS
THEATER 2 SUR. SELECT
10 11 12
+ +
0 10 100
PRESET
MUTE
VOLUME
CH
STEREO
DISC EFFECT