Connecting The Power Supply Cords - Yamaha RX-V3300 Owner's Manual

CONNECTIONS

Connecting the Power Supply Cords

AC IN
AC OUTLETS
ECTOR
WER ON ZONE 2 OUT : 6 MIN./SPEAKER
6 MIN./SPEAKER
FRONT :
EDANCE
REAR : 4 MIN./SPEAKER
CENTER : 4 MIN./SPEAKER
MIN./SPEAKER
REAR CENTER : 4 MIN./SPEAKER
MIN./SPEAKER
4 MIN./SPEAKER
MAIN A OR B :
MIN./SPEAKER
A + B 8 MIN./SPEAKER :
MIN./SPEAKER
MIN./SPEAKER
MIN./SPEAKER
(U.S.A. model)
22
I Connecting the AC power cord
To AC outlet
[U.S.A. model]
Plug the power cord into the AC inlet when all
connections are complete, and then plug in this unit to the
wall outlet.
Caution
• Do not use other AC power cords than the one provided.
Otherwise it may result in causing fire or an electrical
shock.
[Australia model]
Plug this unit into the wall outlet.
Plug in the other components connected to this unit to the
wall outlet.
I AC OUTLET(S) (SWITCHED)
U.S.A. model ................................................ 2 OUTLETS
Australia model .............................................. 1 OUTLET
Use these outlets to connect the power cords from your
components to this unit. The power to the AC
OUTLET(S) is controlled by this unit's STANDBY/ON
(or SYSTEM POWER and STANDBY). These outlets
will supply power to any connected component whenever
this unit is turned on. The maximum power (total power
consumption of components) that can be connected to the
AC OUTLET(S) is 100 W.