Table of Contents
Advertisement
SET MENU
I Setting by "msec"
Control range:
0 to 5.0 ms (for center), 0 to 30.0 ms
(for rear center)
Initial settings:
0 ms (for center), 3.0 ms (for rear
center)
I Setting by "meters"
Control range:
0.15 to 30.00 m (for main L/R,
center, rear L/R, rear center)
Initial settings:
3.00 m (for main L/R, center, rear L/
R), 2.10 m (for rear center)
I Setting by "feet"
Control range:
0.5 to 100 ft (for main L/R, center,
rear L/R, rear center)
Initial settings:
10.0 ft (for main L/R, center, rear L/
R), 7.0 ft (for rear center)
Note
• No delay will be set if the same distance is set for the main L/R
and center, or the rear L/R and rear center with "meters" or
"feet" selected.
70
13 DISPLAY SET
I DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
I OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
Press + to lower the position of the OSD.
Press – to raise the position of the OSD.
I GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there's no video signal input.
Nothing is displayed on the screen including the on-
screen display if OFF is selected.
Choices: AUTO, OFF
Initial setting: AUTO
Note
• If "GRAY BACK" is set to OFF, no information will be
displayed on the screen when video signals are not being input.
I V CONV. (Video conversion)
Use this feature to turn on/off the function to convert
composite signals to S-video signals to output through the
S-video jack when no S-video signals are input.
Choices: ON, OFF
Initial setting: OFF
OFF
Select this not to convert composite signals to S-video
signals.
ON
Select this to convert composite signals to S-video
signals.
Hide quick links:
Advertisement
Table of Contents
