Zone 2/Zone 3 Remote Control - Yamaha RX-V2600 Owner's Manual

CONTROLS AND FUNCTIONS

Zone 2/Zone 3 remote control

This section describes the function of each control on the
Zone 2/Zone 3 remote control used to control Zone 2 or
Zone 3.
Note
The XM Satellite Radio controls (XM, DISPLAY, PRESET,
ALL, CAT., numeric buttons, NUMBER, cursor buttons
k / n / l / h and ENT) are only applicable to the U.S.A. model
and are operational only when XM is selected as the input source.
For details, see "Zone 2/Zone 3 remote control functions" on
page 55.
XM
TUNER CD
1 2
DTV CBL/SAT
1
4 5
VCR1 DVR/VCR2
7 8
+
2
PRESET
–
A/B/C/D/E
3
A-E/CAT.
k
PRESET/CH
k
ALL
ID1 ID2
4
(U.S.A. model)
10
POWER
5
STANDBY
CD-R
6
3
MD/TAPE PHONO
6
ENT
V-AUX
DVD
9
0 0
+
7
VOLUME
–
8
MUTE
DISPLAY
CAT.
PRESET
ZONE 2 ZONE 3
9
NUMBER
1 Input selector buttons
Select the desired input source of Zone 2 or Zone 3 and
change the control area.
2 PRESET +/–
Selects the preset station number (1 to 8) when TUNER is
selected as the input source or Zone 2 or Zone 3.
3 A/B/C/D/E
Selects the preset station group (A to E) when TUNER is
selected as the input source or Zone 2 or Zone 3.
4 ID1/ID2 switch
Switches the remote control ID between ID1 and ID2
(see page 106).
5 POWER
Turns on Zone 2 or Zone 3.
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
6 STANDBY
Sets Zone 2 or Zone 3 to the standby mode.
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
7 VOLUME +/–
Increases or decreases the volume level or Zone 2 or
Zone 3.
8 MUTE
Mutes the sound of Zone 2 or Zone 3.
Press again to restore the audio output to the previous
volume level.
9 ZONE 2/ZONE 3 switch
Switches between the operation mode of Zone 2 and that
of Zone 3.