Remote Control In Zone 2 - Yamaha RX-V640 Owner's Manual

ZONE 2 (FOR U.S.A., CANADA AND AUSTRALIA MODELS)

Remote Control in Zone 2

You can use the supplied remote control in a second room
(Zone 2), as the Zone 2 remote control. You can select the
input source and control the component located in the
main room directly from the second room regardless of
the listening condition in the main room.
I To enable Zone 2 mode on the remote
control
Press ##.
1
CD MD/CD-R
D - TV/CBL
DVD
VCR 1 VCR2/DVR
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator flashes twice.
CODE SET
3
Enter the code number "2999".
Immediately after you have configured the remote
control for Zone 2, the remote will be to main mode.
When the remote is in main mode, you can turn the
main unit on, or set it in standby mode independently
of the Zone 2 by pressing SYSTEM POWER or
STANDBY.
I To use the remote control in Zone 2
Press ## to set the remote control to Zone 2
1
mode.
The TRANSMIT indicator lights up while the remote
control is in Zone 2 mode.
2
Press SYSTEM POWER to turn Zone 2 power
on.
3
Press an input selector button to select the
input source you want to listen to in the
second room.
CD
DVD
VCR 1
Note
• You cannot select VCR2/DVR as the input source.
50
TUNER SLEEP
V - AUX
6CH INPUT
AMP
TRANSMIT
MD/CD-R TUNER
D - TV/CBL V - AUX
VCR2/DVR
4
You can control the component by using the
component control area buttons.
+ +
TV VOL TV CH
– –
TV MUTE TV INPUT
HALL JAZZ CLUB
1
2
MUSIC TV
VIDEO THEATER
5 6
/DTS
SUR. NIGHT
9 0
LEVEL
TITLE
–
TEST
RETURN
REC
DISC SKIP
y
• The SYSTEM POWER, STANDBY and MUTE on the remote
control works for the second room. However Zone 2 volume
cannot be adjusted with the remote control. Use the control on
the amplifier in the second room.
Note
• The remote control returns to normal mode 10 seconds after
you press ##, or if you press any button other than SYSTEM
POWER, STANDBY, MUTE or the input selector buttons. If
the TRANSMIT indicator is turned off, press ## to set the
remote control to Zone 2 mode before turning Zone 2 power
on or off, changing the input source, or muting the sound.
I When you have finished using the unit
To set both the main unit and the Zone 2 in
standby mode
Press STANDBY while holding AMP down.
y
• You can turn on both the main unit and Zone 2 at once by
pressing SYSTEM POWER while holding AMP down.
• The SYSTEM POWER and STANDBY works differently
depending on the selected mode.
TRANSMIT indicator
Main mode off
Zone2 mode
+
VOLUME
–
MUTE
ROCK ENTER-
CONCERT TAINMENT
3 4
MOVIE
MOVIE
THEATER 1 THEATER 2
7 8
6.1/5.1 STEREO
+10 ENTER
EFFECT
PRESET/CH
SET MENU
MENU
A/B/C/D/E
+
SELECT
DISPLAY
AUDIO
SYSTEM POWER/
STANDBY
turn the main unit
on/standby
on turn the Zone2 on/
standby