Controls And Functions; Front Panel - Yamaha RX-V2600 Owner's Manual

CONTROLS AND FUNCTIONS

Front panel

Note
The XM Satellite Radio controls (SEARCH MODE, CATEGORY, PRESET/TUNING/CH l / h, MEMORY and DISPLAY) are only
applicable to the U.S.A. model and are operational only when XM is selected as the input source. For details, see "Front panel
functions" on page 54.
1 2
MAIN ZONE INPUT
ON/OFF
MASTER
ON OFF
1 MASTER ON/OFF
Press inward to the ON position.
• Turns on this unit.
• Turns on the main room.
• Sets Zone 2 and Zone 3 to the standby mode.
Press again to release it outward to the OFF position.
• Turns off this unit.
• Turns off the main room, Zone 2 and Zone 3.
See page 30 for details.
2 MAIN ZONE ON/OFF
Turns on this unit only or sets it to the standby mode.
y
In the standby mode, this unit consumes a small quantity of
power.
Notes
• When you turn on this unit, there will be a 6 to 7 second delay
before this unit can reproduce sound.
• This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
3 INPUT selector
Selects the desired input source.
6
CONTROLS AND FUNCTIONS
3 4 5 6
AUDIO MULTI CH
SELECT INPUT
A/B/C/D/E
CATEGORY
SPEAKERS
SOURCE/
REMOTE
DVD MD/TAPE
DTV CD-R
A B
CBL/SAT CD
YPAO
VCR 1 PHONO SILENT CINEMA
DVR/
TUNER
VCR 2
V-AUX
REC OUT/ZONE 2
OPTIMIZER
MIC PHONES
G H I
7 8 9 0 A B C
PRESET/ TUNING
PRESET/TUNING/CH TUNING FM/AM MEMORY MODE
EDIT
SEARCH MODE DISPLAY MAN'L/AUTO FM AUTO/MAN'L
ZONE ON/OFF ZONE CONTROL
MULTI ZONE
ZONE 2 ZONE 3
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO/AUX
J K L
4 AUDIO SELECT
Toggles the priority for the type of audio input jack
between AUTO, HDMI, COAX/OPT and ANALOG when
one component is connected to two or more input jacks on
the rear panel (see page 44).
5 MULTI CH INPUT
Selects the input source connected to the MULTI CH
INPUT jacks. When selected, the MULTI CH INPUT
source takes priority over the input source selected with
the INPUT selector (or the input selector buttons on the
remote control).
6 A/B/C/D/E
Selects one of the 5 preset station groups (A to E) when
TUNER is selected as the input source (see page 51).
7 PRESET/TUNING/CH l / h
Selects the preset station number (1 to 8) when TUNER is
selected as the input source and the colon (:) is displayed
next to the band indication in the front panel display.
Selects the tuning frequency when TUNER is selected as
the input source and the colon (:) is not displayed in the
front panel display.
See pages 47 to 52 for details.
D E F
PURE DIRECT
VOLUME
TONE
STRAIGHT CONTROL
EFFECT
PROGRAM
(U.S.A. model)
M N