Yamaha RX-V2700 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V2700
  6. Owner's manual

Yamaha RX-V2700 Owner's Manual

Yamaha rx-v2700: owners manual
Hide thumbs Also See for RX-V2700:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
U
RX-V2700
AV Receiver
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V2700

Summary of Contents for Yamaha RX-V2700

  • Page 1 RX-V2700 AV Receiver OWNER’S MANUAL...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
  • Page 5 This receiver supports network connections. “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC. “SILENT CINEMA” is a trademark of YAMAHA CORPORATION. The XM name and related logos are registered trademarks of XM Satellite Radio Inc.

  • Page 6: Table Of Contents

    Controlling iPod ... 75 USING NETWORK/USB FEATURES... 77 Navigating the network and USB menus ... 77 Using a PC server or YAMAHA MCX-2000 ... 79 Using the Internet Radio... 80 Using a USB memory device or a USB portable audio player ... 81 Using shortcut buttons ...
  • Page 7 REMOTE CONTROL FEATURES... 118 Controlling this unit, a TV, or other components ... 118 Setting remote control codes ... 120 Programming codes from other remote controls ... 122 Changing source names in the display window... 123 Macro programming features ... 124 Clearing configurations ...

  • Page 8: Features

    Analog video up-scaling from 480i (NTSC)/576i (PAL) or 480p/576p to 720p or 1080i iPod controlling capability DOCK terminal to connect a YAMAHA iPod universal dock (such as the YDS-10, sold separately), which supports iPod (Click and Wheel), iPod nano, and iPod mini...

  • Page 9: Getting Started

    Supplied accessories Check that you received all of the following parts. Remote control POWER POWER STANDBY POWER NET/USB AUDIO SEL SLEEP PHONO TUNER MULTI CH IN V-AUX/DOCK CBL/SAT MD/TAPE CD-R VCR 1 DVR/VCR 2 SELECT SOURCE TV VOL VOLUME – –...

  • Page 10: Controls And Functions

    CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel This section describes only the amplifier controls and functions of this unit. See the following pages for details about other control and functions. • AM/FM tuning ... see page 56 • XM satellite radio tuning ... see page 64 AUDIO SELECT INPUT...
  • Page 11 8 MULTI ZONE buttons ZONE 2 ON/OFF Turns on Zone 2 only or sets it to the standby mode (see page 131). ZONE 3 ON/OFF Turns on Zone 3 only or sets it to the standby mode (see page 131). Note These buttons are operational only when MASTER ON/OFF is pressed inward to the ON position.

  • Page 12: Remote Control

    Recalls “MEMORY 1” or “MEMORY 2” of “System Memory” (see page 115). RENAME A Network and USB input selector buttons Select the sub input source of NET/USB (see page 78). PC/MCX Selects a PC server or YAMAHA MCX-2000 as the sub input source of NET/USB.
  • Page 13 NET RADIO Selects the Internet radio as the sub input source of NET/USB. Selects a USB memory device or a USB portable audio player as the sub input source of NET/USB. Notes • Press NET/USB to select “NET/USB” as the input source before you press any of the network and USB input selector buttons stated above to select the corresponding sub input source of NET/USB.

  • Page 14: Zone 2/Zone 3 Remote Control

    CONTROLS AND FUNCTIONS Zone 2/Zone 3 remote control This section describes the function of each control on the Zone 2/Zone 3 remote control used to control the amplifier functions of Zone 2 or Zone 3. See the following pages for details about other controls and functions.

  • Page 15: Preparing The Remote Control

    Preparing the remote control Installing batteries in the remote control Press the part and slide the battery compartment cover off. Insert the four supplied batteries (AAA, LR03) according to the polarity markings (+ and –) on the inside of the battery compartment.

  • Page 16: Front Panel Display

    Lights up when this unit is in the recording input source selecting mode (see page 83). 3 DOCK indicator Lights up when you station your iPod in a YAMAHA iPod universal dock (such as the YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 29).
  • Page 17 A neural indicator (U.S.A. and Canada models only) Lights up when the Neural Surround decoder is activated (see page 85). B DSP indicators The respective indicator lights up when any of the DSP sound field programs are selected. CINEMA DSP indicator Lights up when you select a CINEMA DSP sound field program (see page 47).

  • Page 18: Rear Panel

    CONTROLS AND FUNCTIONS Rear panel MONITOR OUT CBL/SAT (PLAY) HDMI TAPE REMOTE CBL/ FRONT(6CH) PHONO CD-R CENTER IN(PLAY) OUT(REC) WOOFER SB(8CH) AUDIO MULTI CH INPUT DOCK DVR/ VCR2 NETWORK 1 COMPONENT VIDEO jacks See pages 23 and 24 for connection information. 20 Audio component jacks See page 26 for connection information.

  • Page 19: Connections

    1.8 m (6 ft) above the floor. Subwoofer (SW) The use of a subwoofer with a built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high...

  • Page 20: Connecting Speakers

    CONNECTIONS Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
  • Page 21 Connect presence left and right speakers to these terminals. SUBWOOFER jack Connect a subwoofer with a built-in amplifier (such as the YAMAHA Active Servo Processing Subwoofer System) to this jack. Connecting the speaker cable Remove approximately 10 mm (0.4 in) of...
  • Page 22 CONNECTIONS Hook the speaker terminal wrench onto the WRENCH HOLDER on the rear panel of this unit when not in use. Connecting to the SP2 speaker terminals Connect Zone 2 or Zone 3 speakers to these terminals (see page 130). Open the tab.

  • Page 23: Using Bi-Amplification Connections

    Using bi-amplification connections Some of the speakers have speaker wire connections that allow bi-amplification to enhance the performance of the speaker system. This unit allows you to make bi- amplification connection to one speaker system. Check if your speakers support bi-amplification. As these speakers are shipped to you, you will note shorting bars or bridges, one connecting the two red input terminals and the other connecting the two black input terminals.

  • Page 24: Information On Jacks And Cable Plugs

    CONNECTIONS Information on jacks and cable plugs Audio jacks and cable plugs AUDIO DIGITAL COAXIAL (White) (Red) (Orange) Left and right Coaxial analog audio digital audio cable plugs cable plug Audio jacks This unit has three types of audio jacks. Connection depends on the availability of audio jacks on your other components.

  • Page 25: Information On Hdmi

    Information on HDMI This unit has the HDMI IN 1, HDMI IN 2, HDMI IN 3 and HDMI OUT jacks for digital audio and video signal input/ output. Connect the HDMI IN 1, HDMI IN 2 or HDMI IN 3 jack of this unit to the HDMI output jack of other HDMI components (such as a DVD player).

  • Page 26: Audio And Video Signal Flow

    CONNECTIONS Audio and video signal flow Audio signal flow Input HDMI DIGITAL AUDIO (COAXIAL) DIGITAL AUDIO (OPTICAL) AUDIO Digital output Analog output Notes • 2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI IN 1, HDMI IN 2 or HDMI IN 3 jack can be output at the HDMI OUT jack only when “Support Audio”...

  • Page 27: Connecting A Tv Monitor Or Projector

    Connecting a TV monitor or projector Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit. CAUTION Do not connect this unit or other components to the AC power supply until all connections between components are complete.

  • Page 28: Connecting Other Components

    CONNECTIONS Connecting other components CAUTION Do not connect this unit or other components to the AC power supply until all connections between components are complete. Notes • When “Conversion” is set to “Off” (see page 102), be sure to make the same type of video connections as those made for your TV (see page 23).
  • Page 29 DVR/VCR 2 DVR/VCR 2 DIGITAL INPUT DIGITAL OUTPUT COAXIAL OPTICAL DVR/ CD-R VCR2 DVD recorder, PVR or VCR Satellite receiver, HDTV decoder cable TV receiver VIDEO CBL/SAT DIGITAL INPUT OPTICAL CBL/ (U.S.A. model) CONNECTIONS HDMI out Component out Optical out...

  • Page 30: Connecting Audio Components

    CONNECTIONS Connecting audio components Notes • To make a digital connection to a component other than the default component assigned to either the DIGITAL INPUT jack or the DIGITAL OUTPUT jack, select the corresponding setting for “Option”, “Optical Output”, or “Coaxial Input” in “I/O Assignment” (see page 96).

  • Page 31: Connecting An External Amplifier

    Connecting an external amplifier This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Notes •...

  • Page 32: Connecting A Multi-Format Player Or An External Decoder

    CONNECTIONS Connecting a multi-format player or an external decoder This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or pre-amplifier.

  • Page 33: Connecting A Yamaha Ipod Universal Dock

    This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a YAMAHA iPod universal dock (such as the YDS-10, sold separately) where you can station your iPod and control playback of your iPod using the supplied remote control.

  • Page 34: Connecting The Network

    (Dynamic Host Configuration Protocol) server function. The following diagram shows a connection example where this unit is connected to one of the LAN ports on a 4-port router. To enjoy music files saved on your PC and YAMAHA MCX-2000 or access the Internet Radio, each device must be connected properly in the network.

  • Page 35: Connecting The Fm And Am Antennas

    • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas. Indoor FM AM loop antenna...

  • Page 36: Connecting The Power Cable

    CONNECTIONS Connecting the power cable Connecting the AC power cable CAUTION Use the supplied AC cable. Do not use other AC power cables as doing so may result in fire or electrical shock. Plug the supplied AC power cable into the AC inlet after all other connections are complete, then plug the AC power cable into an AC wall outlet.

  • Page 37: Setting The Speaker Impedance

    Setting the speaker impedance CAUTION If you are to use 6 ohm speakers, set “SPEAKER IMP.” to “6ΩMIN” as follows BEFORE using this unit. 4 ohm speakers can be also used as the front speakers. AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING SELECT...

  • Page 38: Turning On And Off The Power

    CONNECTIONS Turning on and off the power When all connections are complete, turn on this unit. MAIN ZONE ON/OFF AUDIO TONE REC OUT/ SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING INPUT STRAIGHT MAIN ZONE MULTI ZONE EFFECT YPAO S VIDEO SILENT CINEMA ON/OFF PROGRAM OPTIMIZER...

  • Page 39: Auto Setup

    This unit employs the YPAO (YAMAHA Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening environment.
  • Page 40 AUTO SETUP Make sure of the following check points before starting the Auto Setup operations. • Speakers are connected appropriately. • Supplied optimizer microphone is connected to this unit and placed appropriately. • Headphones are disconnected from this unit. • The room is sufficiently quiet. •...
  • Page 41 Repeat steps 7 and 8 until you set all the desired parameters. Skip Wiring Check Distance Size Wiring Skip Distance Check Size Equalizing Wiring Distance Skip Size Check Equalizing Level Distance Size Skip Equalizing Check: Natural Level Check: Flat Check: Front Size Equalizing Skip...
  • Page 42 AUTO SETUP Press ENTER to start the setup procedure. This unit starts the auto setup procedure. Loud test tones are output from each speaker during the auto setup procedure. During the setup procedure, “Measuring...” appears in the GUI screen. We recommend getting out of the room while thus unit is in the auto setup procedure.
  • Page 43 Press k / n repeatedly and then h to select “Auto Setup”. PRESET/CH ENTER A/B/C/D/E Press k to select “Information”. Information Wiring Setup Menu Distance Start Size Press h and then n repeatedly to select the desired check items. PRESET/CH ENTER A/B/C/D/E Left...

  • Page 44: Playback

    PLAYBACK CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.
  • Page 45 Start playback on the selected source component or select a broadcast station. • Refer to the operating instructions for the source component. • See page 56 for details about tuning instructions. • See page 67 for details about XM Satellite Radio tuning instructions.

  • Page 46: Selecting Audio Input Jacks (Audio Select)

    PLAYBACK Selecting audio input jacks (AUDIO SELECT) This unit comes with a variety of input jacks. Use this feature (Audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source. •...

  • Page 47: Selecting The Multi Ch Input Component

    Selecting the MULTI CH INPUT component Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 28) as the input source. Rotate the input selector on the front panel to select MULTI CH INPUT (or MULTI CH IN on the remote control).

  • Page 48: Operating The Amplifier Functions Of This Unit By Using The Graphical User Interface (Gui) Screen

    PLAYBACK Operating the amplifier functions of this unit by using the graphical user interface (GUI) screen This unit features a sophisticated graphical user interface (GUI) screen that helps you to control the amplifier function of this unit. With the GUI screen, you can view the information of the signals being input and the status of this unit. You can also set up this unit using the GUI screen (see page 87).

  • Page 49: Playing Video Sources In The Background Of An Audio Source

    Playing video sources in the background of an audio source You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Press the input selector buttons on the remote control to select a video source and then an audio source.

  • Page 50: Sound Field Programs

    This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

  • Page 51: Sound Field Program Descriptions

    Sound field program descriptions Select a sound field program based on your listening preference, not merely on the name of the program, etc. Remote control Category of the button program MOVIE MOVIE This program clearly reproduces dialog and sound effects in the latest sound form for science fiction films, thus creating a broad and expansive cinematic space amid silence.
  • Page 52 SOUND FIELD PROGRAMS CLASSICAL CLASSICAL This program creates a relatively wide space with a high ceiling like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music. DSP Level Liveness Init. Delay Rev.
  • Page 53 ENTERTAIN ENTERTAINMENT This sound field has been optimized for action games such as car racing and FPS games. It uses the reflection data that limits the effects range per channel in order to offer a powerful playing environment with a being-there feeling by enhancing various effects tones while maintaining a clear sense of directions.

  • Page 54: Stereo Playback

    SOUND FIELD PROGRAMS MOVIE MOVIE This program creates the extremely wide sound field of a 70-mm movie theater. It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real. This is ideal for any kind of video source encoded with Dolby Surround, Dolby Digital or DTS (especially large-scale movie productions).

  • Page 55: Enjoying Unprocessed Input Sources

    Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field. When you set “Surround” to None” (see page 106), “...

  • Page 56: Using Audio Features

    USING AUDIO FEATURES Enjoying pure hi-fi sound Use the Pure Direct mode to enjoy the pure fidelity sound of the selected source. When the Pure Direct mode is activated, this unit plays back the selected source with the least circuitry. Press PURE DIRECT on the front panel (or on the remote control) to turn on or off the Pure Direct mode.

  • Page 57: Adjusting The Speaker Level

    Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. Note This operation will override the level adjustments made in “Auto Setup”...

  • Page 58: Selecting The Compressed Music Enhancer Mode

    USING AUDIO FEATURES Selecting the Compressed Music Enhancer mode Compression artifacts (such as the MP3 format) are created by a lossy compression scheme where the audio is resampled to lower the bit rate and to remove sounds that are indistinguishable to typical human hearing. The Compressed Music Enhancer feature of this unit enhances your listening experience by regenerating the missing harmonics in a compression artifact.

  • Page 59: Selecting The Night Listening Mode

    Selecting the night listening mode The night listening modes are designed to improve listenability at lower volumes or at night. Choose either “NIGHT:CINEMA” or “NIGHT:MUSIC” depending on the type of material you are playing. Press NIGHT on the front panel (or set the operation mode selector to AMP and then press NIGHT on the remote control) repeatedly to select “NIGHT:CINEMA”...

  • Page 60: Fm/Am Tuning

    FM/AM TUNING There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups).

  • Page 61: Automatic Tuning

    Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference. AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING ZONE2 FM/AM ENHANCER SELECT CONTROL A/B/C/D/E PRESET/TUNING/CH TUNING MAN'L/AUTO FM MODE EDIT INPUT STRAIGHT ZONE ON/OFF ZONE CONTROLS MAIN ZONE MULTI ZONE EFFECT...

  • Page 62: Manual Tuning

    FM/AM TUNING Manual tuning If the signal received from the station you want to select is weak, tune into it manually. Note Manually tuning into an FM station automatically switches the tuner to monaural reception to increase the signal quality. AUDIO TONE REC OUT/...

  • Page 63: Automatic Preset Tuning

    Automatic preset tuning You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) in order. You can then recall any preset station easily by selecting the preset station number.

  • Page 64: Manual Preset Tuning

    FM/AM TUNING Manual preset tuning You can also store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) manually. AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING TUNING FM/AM...

  • Page 65: Selecting Preset Stations

    Selecting preset stations You can tune into any desired station simply by selecting the preset station group and number under which it was stored. AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING TUNING FM/AM MAN'L/AUTO FM MODE EDIT INPUT...

  • Page 66: Exchanging Preset Stations

    FM/AM TUNING Exchanging preset stations You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”. AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING TUNING...

  • Page 67: Xm Satellite Radio Tuning

    XM SATELLITE RADIO TUNING XM Satellite Radio is a satellite radio service with millions of listeners across the United States and Canada, broadcasting live daily. The XM Satellite Radio channel lineup includes over 160 digital channels of choice from coast to coast: 67 commercial-free music channels, featuring hip hop to opera, classical to country, bluegrass to blues;...

  • Page 68: Xm Satellite Radio Controls And Functions

    XM SATELLITE RADIO TUNING XM Satellite Radio controls and functions Note The following controls are available only when “XM” is selected as the input source. Rotate the INPUT selector on the front panel (or set the operation mode selector to SOURCE and then press XM on the remote control) to select “XM” as the input source. Front panel functions AUDIO TONE...

  • Page 69: Activating Xm Satellite Radio

    5 SRCH MODE Changes the search mode between the All Channel Search, Category Search, and Preset Search modes (see page 68). 6 A-E/CAT. l / h (All Channel Search mode) Changes the channel category. (Category Search mode) Changes the channel category. (Preset Search mode) Changes the preset channel group (A to E).
  • Page 70 XM SATELLITE RADIO TUNING AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING/CH TUNING FM/AM MAN'L/AUTO FM MODE EDIT CATEGORY SEARCH MODE DISPLAY INPUT STRAIGHT ZONE ON/OFF ZONE CONTROLS MAIN ZONE MULTI ZONE EFFECT ZONE 2 ZONE 3 YPAO SILENT CINEMA S VIDEO...

  • Page 71: Basic Xm Satellite Radio Operations

    Basic XM Satellite Radio operations AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING ENHANCER SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING/CH TUNING FM/AM MAN'L/AUTO FM MODE EDIT CATEGORY SEARCH MODE DISPLAY INPUT STRAIGHT ZONE ON/OFF ZONE CONTROLS MAIN ZONE MULTI ZONE EFFECT ZONE 2 ZONE 3 YPAO SILENT CINEMA...
  • Page 72 XM SATELLITE RADIO TUNING All Channel Search mode AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING SELECT CONTROL ZONE2 A/B/C/D/E PRESET/TUNING/CH TUNING FM/AM MAN'L/AUTO FM MODE EDIT CATEGORY SEARCH MODE DISPLAY INPUT STRAIGHT ZONE ON/OFF ZONE CONTROLS MAIN ZONE MULTI ZONE EFFECT ZONE 2 ZONE 3...
  • Page 73 Category Search mode AUDIO TONE REC OUT/ PRESET/ MEMORY TUNING ZONE2 FM/AM SELECT CONTROL A/B/C/D/E PRESET/TUNING/CH TUNING MAN'L/AUTO FM MODE EDIT CATEGORY SEARCH MODE DISPLAY INPUT STRAIGHT ZONE ON/OFF ZONE CONTROLS MAIN ZONE MULTI ZONE EFFECT ZONE 2 ZONE 3 YPAO SILENT CINEMA S VIDEO...
  • Page 74 XM SATELLITE RADIO TUNING Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting the XM Satellite Radio preset channels” on page 72. The initial factory setting of all preset channels (A1 to E8) is “[001] Preview”.
  • Page 75 Direct Number Access mode PRESET/CH LEVEL SET MENU PURE DIRECT TITLE MENU SRCH MODE ENTER AUDIO A-E/CAT. PARAMETER STRAIGHT RETURN DISPLAY MEMORY EFFECT CLASSICAL LIVE/CLUB ENTERTAIN MOVIE STEREO SUR. DECODE SELECT EXTD SUR. MEMORY NIGHT ENHANCER (U.S.A. model) Press SRCH MODE on the remote control repeatedly to select “ALL CH SEARCH”...

  • Page 76: Setting The Xm Satellite Radio Preset Channels

    XM SATELLITE RADIO TUNING Setting the XM Satellite Radio preset channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode”...

  • Page 77: Displaying The Xm Satellite Radio Information

    Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH k / n on the remote control) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing. The preset channel number appears in the front panel display.
  • Page 78 XM SATELLITE RADIO TUNING When the channel number / name is displayed: [043] XMU When the channel category is displayed: <CAT>Rock When the artist name / song title is displayed: Coldplay / Spe • The front panel display can indicate up to 14 alphanumeric characters at once.

  • Page 79: Using Ipod

    AUDIO OUT (REC) jacks for recording. • Your iPod battery is automatically charged when your iPod is stationed in a YAMAHA iPod universal dock (such as the YDS-10, sold separately) connected to the DOCK terminal of this unit as long as this unit is turned on. You can also select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode by selecting the “Standby Charge”...
  • Page 80 USING iPod Set the operation mode selector to SOURCE and then press DISPLAY on the remote control. The following display appears in the video monitor. SOURCE Playlists Artists Albums Songs Genres Composers Settings Press k / n / l / h on the remote control to navigate the iPod menu and then press ENTER to begin playback of the selected song.

  • Page 81: Using Network/Usb Features

    This unit is equipped with network and USB features that allow you to enjoy WAV (PCM format only), MP3 and WMA files saved on your PC, YAMAHA MCX-2000, USB memory device and USB portable audio player or access the Internet Radio.
  • Page 82 USING NETWORK/USB FEATURES The following procedure shows the basic steps to navigate the network and USB menus. See pages 79 and 80 for details about each sub input source. Note “Please wait” may appear whenever it takes time for communication. This is not a system malfunction. Wait for a while.

  • Page 83: Using A Pc Server Or Yamaha Mcx-2000

    Select a desired server or MusicCAST to begin playback. Notes • YAMAHA MCX-2000 may not be for sale in some locations. • You can connect this unit to up to 4 PC servers and 1 MCX-2000, and each server must be connected to the same subnet as this unit.

  • Page 84: Using The Internet Radio

    Registering this unit on the YAMAHA MCX-2000 You must register this unit on your YAMAHA MCX-2000 so that this unit can be recognized by your YAMAHA MCX-2000. For details, refer to the operation manual supplied with your YAMAHA MCX-2000. Turn off this unit.

  • Page 85: Using A Usb Memory Device Or A Usb Portable Audio Player

    Using a USB memory device or a USB portable audio player Use this feature to enjoy WAV (PCM format only), MP3 and WMA files saved on your USB memory device or USB portable audio player connected to the USB port on the front panel of this unit.
  • Page 86 USING NETWORK/USB FEATURES Press desired numeric buttons (1-8). The number of the selected numeric button appears in the video monitor or front panel display. LIVE/CLUB CLASSICAL ENTERTAIN STEREO SUR. DECODE SELECT NET/USB V-AUX DVR/VCR 2 VCR 1 CBL/SAT 1: PC/MCX Selected preset number Press ENTER or MEMORY to confirm the preset.

  • Page 87: Recording

    Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. CAUTION The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources encoded in DTS, the following considerations and adjustments need to be made.

  • Page 88: Advanced Sound Configurations

    ADVANCED SOUND CONFIGURATIONS ADVANCED SOUND CONFIGURATIONS Selecting decoders Selecting decoders for 2-channel sources (surround decode mode) Use this feature to play back sources with selected decoders. You can play back 2-channel sources on multi- channels. Set the operation mode selector to AMP and then press SUR.
  • Page 89 SUR.DECODE SUR. DECODE Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for game sources. Back” is set to “None” (see page 106). SUR.DECODE SUR. DECODE DTS processing for movie sources SUR.DECODE SUR. DECODE DTS processing for music sources Center Image SUR.DECODE SUR.
  • Page 90 ADVANCED SOUND CONFIGURATIONS Selecting decoders for multi-channel sources If you connected surround back speakers, use this feature to enjoy 6.1/7.1-channel playback for multi-channel sources using the Dolby Pro Logic IIx, Dolby Digital EX or DTS-ES decoders. Set the operation mode selector to AMP and then press EXTD SUR.

  • Page 91: Graphic User Interface (Gui) Screen

    GRAPHIC USER INTERFACE (GUI) SCREEN This unit features a sophisticated graphical user interface (GUI) screen that helps you to control the amplifier function of this unit. With the GUI screen, you can view the information of the signals being input and the status of this unit. Stereo/Surround (Stereo/Surround menu) Use this feature to select the sound field programs and customize the program parameter settings (see page 88).

  • Page 92: Stereo/Surround (Stereo/Surround Menu)

    GRAPHIC USER INTERFACE (GUI) SCREEN Stereo/Surround (Stereo/Surround menu) Use this feature to select the sound field programs (see page 46), the surround decode mode, the “STRAIGHT” mode (See page 51) or the Compressed Music Enhancer mode (See page 54), and adjust the parameters of each program.

  • Page 93: Sound Field Parameter Descriptions

    Sound field parameter descriptions You can adjust the values of certain digital sound field parameters so that the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. Sound field parameter Decoder Type Decoder type.
  • Page 94 GRAPHIC USER INTERFACE (GUI) SCREEN Sound field parameter Room Size Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound field becomes. As the Sur.
  • Page 95 Sound field parameter Rev. Time Reverberation time. Adjusts the amount of time taken for the dense, subsequent reverberation sound to decay by 60 dB at 1 kHz. This changes the apparent size of the acoustic environment over an extremely wide range. Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time for “live”...
  • Page 96 GRAPHIC USER INTERFACE (GUI) SCREEN Sound field parameter Rev. Level Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes. Control range: 0 to 100% Dialogue Lift Dialogue lift. Adjusts the height of the front and center channel sounds by assigning some of the front and center channel elements to the presence speakers.
  • Page 97 The Compressed Music Enhancer mode parameter descriptions The Compressed Music Enhancer mode 2ch Enhancer 2-channel enhancer or 7-channel enhancer effect level. Select “High” or “Low” to adjust the effect for the high-frequency. 7ch Enhancer Choices: High, Low Decoder parameter descriptions Decoder parameter Pro Logic IIx Music Pro Logic IIx Music and Pro Logic II Music panorama.

  • Page 98: Input Select

    • When iPod is stationed in a YAMAHA iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit, “DOCK” appears in the “Input Select”...
  • Page 99 Volume Trim (Volume trimming) Use this feature to adjust the level of the signal input at each input source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Control range: –6.0 dB to +6.0 dB Initial setting: 0.0 dB Audio Select...
  • Page 100 GRAPHIC USER INTERFACE (GUI) SCREEN I/O Assignment (Input/output assignment) Use this feature to assign the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.

  • Page 101: Manual Setup (Sound)

    Multi CH Assign (Multi channel assignment) Use this feature to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks. If you input 8-channel signals from an external decoder, use this feature to select jacks for the additional front signals.
  • Page 102 GRAPHIC USER INTERFACE (GUI) SCREEN LFE Level (Low-frequency effect level) Use this feature to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes.
  • Page 103 Press n to select “EDIT” and press ENTER to access the edit window. Band Gain Freq. Test Tone Front L Front R Center The parameter selected in “PARAM” is highlighted. • Press l / h to adjust the parameter. • Press k / n to adjust the “Gain”. •...
  • Page 104 GRAPHIC USER INTERFACE (GUI) SCREEN Auto Bypass (Auto bypass) Use this feature to select whether the audio output bypasses the tone control circuitry when “TREBLE” and “BASS” are set to 0 dB (see page 52). Choices: Auto, Off Bass Treble Auto Bypass Auto •...

  • Page 105: Manual Setup (Video)

    Note The “Max Volume” setting takes priority over the “Initial Volume” setting. Therefore, Initial Volume cannot be set beyond the existing “Max Volume” setting. Channel Mute (Channel mute) Use this feature to mute specific speaker channels. Mode (Mode) Use this feature to activate or deactivate the “Channel Mute”...
  • Page 106 GRAPHIC USER INTERFACE (GUI) SCREEN Note Use the “V-RESET” in “ADVANCED SETUP” to set the parameters in “Manual Setup (Video)” (except “Short Message” and “On Screen”) to the factory presets (see page 136). Conversion (Video conversion) Use this feature to activate or deactivate the video conversion as well as the HDMI up-conversion of the analog video signals input at the composite video, S-video and component video jacks.
  • Page 107 Notes • This menu item is not available and hence not visible in the GUI menu if “Conversion” is set to “Off” (see page 102). • When you set “TV FORMAT” in “ADVANCED SETUP” to “NTSC” (see page 136), “480p” appears in the choices of “HDMI Up-Scaling”, and when you set “TV FORMAT”...

  • Page 108: Manual Setup (Basic)

    GRAPHIC USER INTERFACE (GUI) SCREEN Position (GUI screen position) Use this feature to adjust the vertical and horizontal position of the GUI screen. Control range: –5 (downward/left) to +5 (upward/right) Short Message On Screen Position Wall Paper • Press k to raise the position of the GUI display. •...
  • Page 109 • Most of the parameters described in the basic menu are set automatically when you run “Auto Setup”. You can use the basic menu to make further adjustments, but we recommend running “Auto Setup” first. • You can reset these parameters by performing the “Auto Setup” procedure (see page 35).
  • Page 110 GRAPHIC USER INTERFACE (GUI) SCREEN Surround (Surround left/right speakers) Choices: Large, Small, None Front Center Large Surround Small Surround Back None Presence • Select “Large” (large) if you have large surround left and right speakers that reproduce low-frequency signals effectively. All the surround channel signals are directed to the surround left and right speakers.
  • Page 111 Bass Out (Bass out) Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: Both, SWFR, Front Surround Back Presence Bass Out Both Bass Cross Over SWFR SWFR Phase Front Notes • Select “Both” (both) if you connected a subwoofer. The low-frequency signals of any source are output from the subwoofer.
  • Page 112 GRAPHIC USER INTERFACE (GUI) SCREEN Speaker Distance (Speaker distance) Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations.

  • Page 113: Manual Setup (Net/Usb)

    Speaker Level (Speaker level) Use this feature to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in “SPEAKER SET” (see page 105). Speaker Set Presence R Speaker Distance Subwoofer Speaker Level Front L Front R Center...
  • Page 114 GRAPHIC USER INTERFACE (GUI) SCREEN DNS Server (P) (Primary DNS server) DNS Server (S) (Secondary DNS server) Use this parameter to specify the IP address of the primary and secondary DNS (Domain Name System) servers. Note If you have only one DNS address, enter the DNS address in “DNS Server (P)”.

  • Page 115: Manual Setup (Option)

    Information (Network information) Use this feature to display the network system information. Network MAC Address 00:00:00:00:00:00 Play Style Status Information 100 BASE-TX Full Duplex System ABCDE123 Note The above display is an example. MAC Address (MAC (Media Access Control) address) This information displays the MAC address that is assigned to this unit.
  • Page 116 GRAPHIC USER INTERFACE (GUI) SCREEN Front Panel Disp. (Front panel display setting) Dimmer (Dimmer) Use this feature to adjust the brightness of the front panel display. Control range: – 4 to 0 Dimmer Scroll Scroll (Front panel display message scroll) Use this feature to set whether to display the information (such as song title or channel name) in the front panel display in a continuous manner or by the first 14...
  • Page 117 Zone2 Set/Zone3 Set (Zone 2/Zone 3 setting) Zone2 Amplifier/Zone3 Amplifier (Zone 2/Zone 3 amplifier) Use to select how the Zone 2 and/or Zone 3 speakers are amplified. Choices: EXT, INT:[SP1], INT:[SP2], INT:Both Zone2 Amplifier INT:[SP1] Zone2 Volume Zone2 Max Vol. INT:[SP2] •...

  • Page 118: Audio Select

    GRAPHIC USER INTERFACE (GUI) SCREEN Zone2 Initial Vol./Zone3 Initial Vol. (Zone 2/Zone 3 Initial volume) Use this feature to set the volume level of Zone 2 or Zone 3 when the power of this unit is turned on. Choices: Off, –80 dB to +16.5 dB Control step: 0.5 dB Zone2 Volume Zone2 Max Vol.

  • Page 119: System Memory

    RX-V2700 Support Audio Other • Select “RX-V2700” to play back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI IN jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit.

  • Page 120: Signal Info. (Input Signal Information)

    GRAPHIC USER INTERFACE (GUI) SCREEN To load settings Set the operation mode selector to AMP and then press SET MENU on the remote control. SOURCE Press k / n / l / h on the remote control repeatedly to select “System Memory” and then press h.

  • Page 121: Language

    Audio information Format (Signal format) Signal format. When this unit cannot detect a digital signal, it automatically switches to analog input. Note “---” appears when this unit cannot detect any signals. Sampling (Sampling frequency) The number of samples per second taken from a continuous signal to make a discrete signal.

  • Page 122: Remote Control Features

    REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other audiovisual components made by YAMAHA and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input source (see page 120).

  • Page 123: Controlling Other Components

    Controlling other components Set the operation mode selector to SOURCE to control other components selected with the input selector buttons. You must set the appropriate remote control code for each input source in advance (see page 120). The following table shows the function of each control button used to control other components assigned to each input selector button.

  • Page 124: Setting Remote Control Codes

    VCR 1 DVR/VCR2 YAMAHA YAMAHA Note You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is preset as listed above. In this case, try setting another YAMAHA remote control code. Default code...
  • Page 125 • The supplied remote control does not contain all possible codes for commercially available audio and video components (including YAMAHA components). If operation is not possible with any of the remote control codes, program the new remote control function using the learn feature (see “Programming codes from other remote controls”) or use the remote control...

  • Page 126: Programming Codes From Other Remote Controls

    REMOTE CONTROL FEATURES Programming codes from other remote controls You can program remote control codes from other remote controls. Use the learn feature if you want to program functions not included in the basic operations covered by the remote control codes, or an appropriate remote control code is not available.

  • Page 127: Changing Source Names In The Display Window

    Press and hold the button you want to program on the other remote control until “OK” appears in the display window on the remote control. “NG” appears in the display window on the remote control if learning was unsuccessful. In this case, start over from step 4.

  • Page 128: Macro Programming Features

    REMOTE CONTROL FEATURES Press k / n to select and enter a character. Pressing n changes the character as follows: A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon), / (slash), and space. Pressing k changes the characters in reverse order. PRESET/CH ENTER A/B/C/D/E...
  • Page 129 DVR/VCR 2 You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC OUTLETS on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component.
  • Page 130 REMOTE CONTROL FEATURES Programming macro operations You can program your own macro and use the macro programming feature to transmit several remote control commands in sequence at the press of a button. Be sure to set up remote control codes or perform learning operations before programming the macro.

  • Page 131: Clearing Configurations

    Clearing configurations You can clear all changes made in each function set, such as learned functions, macros, renamed input area names and setup remote control ID. Clearing function sets Set the operation mode selector to AMP or SOURCE and then press CLEAR by using a ballpoint pen or similar object.

  • Page 132: Clearing A Learned Function

    REMOTE CONTROL FEATURES Clearing a learned function You can clear the function learned for a certain button in each control area. Set the operation mode selector to AMP or SOURCE and then press an input selector button to select the input area containing the function you want to clear.
  • Page 133 Clearing a macro function You can clear the function programmed for a certain macro button. Set the operation mode selector to AMP or SOURCE and then press MACRO using a ballpoint pen or similar object. “MCR ?” appears in the display window on the remote control.

  • Page 134: Using Multi-Zone Configuration

    • Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with your nearest authorized YAMAHA dealer or service center for the Zone 2 and Zone 3 connections that best meet your requirements.

  • Page 135: Controlling Zone 2 Or Zone 3

    Using the internal amplifiers of this unit The SP1 or SP2 speaker terminals of this Receiver should not be connected to a Passive Loudspeaker Selector Box or more than one loudspeaker per channel. Connection to a Passive Loudspeaker Selector Box or multiple speakers per channel could create an abnormally low impedance load resulting in amplifier damage.
  • Page 136 USING MULTI-ZONE CONFIGURATION • You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE CONTROLS again. • The initial setting is ZONE2 when both Zone 2 and Zone 3 are turned on.
  • Page 137 INPUT PHONO SOURCE V-AUX/DOCK (U.S.A. model) • Select TUNER as the input source to use the TUNER features in the selected zone. For details about the TUNER operations, see “FM/AM TUNING” on page 56. • Select XM as the input source to use the XM Satellite Radio features in the selected zone.

  • Page 138: Advanced Setup

    ADVANCED SETUP This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
  • Page 139 Speaker impedance SPEAKER IMP. Use this feature to set the speaker impedance of this unit so that it matches that of your speakers. Choices: 8ΩMIN, 6ΩMIN • Select “8ΩMIN” to set the speaker impedance to 8 Ω . • Select “6ΩMIN” to set the speaker impedance to 6 Ω . SPEAKER Speaker Impedance level...
  • Page 140 • When the network settings are reset, “DHCP” in “NET/USB” is automatically set to “On” (see page 109) and the registered client ID of this unit on your YAMAHA MCX-2000 is cleared (see page 80). TV format TV FORMAT Use this feature to set the color encoding format of your television.

  • Page 141: Setting Remote Control Id

    Setting remote control ID hen using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately. Setting remote control AMP ID Set the operation mode selector to AMP or SOURCE.
  • Page 142 ADVANCED SETUP Setting remote control tuner ID or XM ID Set the operation mode selector to AMP or SOURCE and then press TUNER or XM on the remote control to select the tuner or XM to change the remote control ID. SOURCE SOURCE Press and hold LEARN for about 3 seconds...

  • Page 143: Troubleshooting

    Play a source whose signals can be reproduced by this unit. Connect HDMI components that support the HDCP copy protection standards. Set “Support Audio” to “RX-V2700” in “Option”. TROUBLESHOOTING Remedy page —...
  • Page 144 TROUBLESHOOTING Problem No picture. The output and input for the picture are connected to different types of video jacks. Non-standard video signals are input. Short message “Short Message” is set to “OFF”. displays do not “Wall Paper” is set to “None”. appear in the video monitor.
  • Page 145 Problem No sound is heard “Surround” in “Speaker Set” is set to from the surround “None” and “Surround Back” is back speakers. automatically set to “None”. “Surround Back” in “Speaker Set” is set to “None”. Dolby Digital or DTS The connected component is not set to sources cannot be output Dolby Digital or DTS digital played.
  • Page 146 TROUBLESHOOTING Problem This unit does not The internal microcomputer has been operate properly. frozen by an external electric shock (such as lightning or excessive static electricity) or by a power supply with low voltage. “CHECK SP WIRES” Speaker cables are short-circuited. appears in the front panel display.
  • Page 147 XM Satellite Radio (U.S.A. and Canada models only) If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message CHECK ANTENNA The XM Passport and XM Passport Home...
  • Page 148 TROUBLESHOOTING Problem The remote control Even if the remote control code is does not work or correctly set, there are some models that function properly. do not respond to the remote control. The remote control The batteries of this remote control and/or does not learn new the other remote control are too weak.
  • Page 149 Problem “Disconnected” is This unit recognized the USB device as displayed even when a an illegal device. USB device is present. The Internet Radio cannot The firewall of the network device is be played. activated. The Internet Radio can be played only when it passes through the port designated by each radio station.
  • Page 150 TROUBLESHOOTING Status message Connect error There is a problem with the signal path from your network to this unit. Disconnected Your USB memory device or USB portable audio player has been disconnected from the USB port of this unit. The PC server or MCX-2000 previously connected to this unit no longer exists.
  • Page 151 Memory Guard! “Memory Guard” is set to “On”. Cause Turn off this unit and reconnect the YAMAHA iPod universal dock to the DOCK terminal of this unit. Try resetting your iPod. Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
  • Page 152 • If warning “W1” appears, corrections are made, but they may not be optimal. • If warning “W2” or “W3” appears, no corrections are made. • If error “E10” occurs repeatedly, please contact a qualified YAMAHA service center. Cause Check the front L/R speaker connections.

  • Page 153: Resetting The System

    RESETTING THE SYSTEM Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit. However, the advanced setup menu parameters will not be initialized. •...

  • Page 154: Glossary

    GLOSSARY Bi-amplification connection A bi-amplification connection uses two amplifiers for a speaker. One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined mid and tweeter section. With this arrangement each amplifier operates over a restricted frequency range. This restricted range presents each amplifier with a much simpler job and each amplifier is less likely to influence the sound in some way.
  • Page 155 HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multi-channel digital audio using a single cable.
  • Page 156 GLOSSARY PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time.

  • Page 157: Sound Field Program Information

    The acoustics in your room could be changed to those of a concert hall, a dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what YAMAHA has done with the digital sound field processor. CINEMA DSP...

  • Page 158: Parametric Equalizer Information

    PARAMETRIC EQUALIZER INFORMATION PARAMETRIC EQUALIZER INFORMATION This unit employs YAMAHA Parametric Room Acoustic Optimizer (YPAO) technology, together with the Parametric EQ settings (see page 98), to optimize the frequency characteristics of its parametric equalizer to match your listening environment. YPAO uses a...

  • Page 159: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back 20 Hz to 20 kHz, 0.04% THD, 8 Ω ... 140 W • Dynamic Power (IHF) 8/6/4/2 Ω ... 170/205/265/345 W • Maximum Useful Output Power (JEITA) [Asia, General, China and Korea models] 1 kHz, 10% THD, 8 Ω...
  • Page 160 SPECIFICATIONS AM SECTION • Tuning Range [U.S.A. and Canada models] ... 530 to 1710 kHz [Asia and General models] ... 530/531 to 1710/1611 kHz [Other models] ... 531 to 1611 kHz • Usable Sensitivity ... 300 µV/m GENERAL • Power Supply [U.S.A.

  • Page 161: Sound Output In Each Sound Field Program

    SOUND OUTPUT IN EACH SOUND FIELD PROGRAM Front left speaker Center speaker Front right speaker Speaker from which sound is being output : OFF PL x : ON, PRIORITY: PRNS PL x : ON, PRIORITY: SB PL x Program 2-channel audio (monaural) CLASSICAL Hall in Munich...

  • Page 162: Input Source

    Program 2-channel audio (monaural) MOVIE STANDARD (PLII Movie) (PLIIx Movie) (Neo:6 Cinema) MOVIE Spectacle Sci-Fi Adventure Drama Mono Movie STEREO 2ch Stereo Monaural playback STEREO 7ch Stereo Input source 2-channel audio 5.1/6.1-channel (stereo) audio * PRIORITY: PRNS (Dolby Digital) (DTS) PRIORITY: SB 5.1/6.1-channel 5.1/6.1-channel...
  • Page 163 Program 2-channel audio (monaural) SURROUND DECODE PRO LOGIC SURROUND DECODE PLII Movie PLII Music PLII Game Movie/Game Music SURROUND DECODE PLIIx Movie PLIIx Music PLIIx Game Movie/Game Music Input source 2-channel audio 5.1/6.1-channel (stereo) audio * PRO LOGIC Dolby Digital Dolby Digital Movie/Music/Game Dolby Digital...
  • Page 164 Program 2-channel audio (monaural) SURROUND DECODE Neo:6 Cinema Neo:6 Music Cinema Music SURROUND DECODE neural sur. STRAIGHT Monaural playback PURE DIRECT Monaural playback Input source 2-channel audio 5.1/6.1-channel (stereo) audio * Cinema/Music Dolby Digital Dolby Digital 5.1/6.1-channel 5.1/6.1-channel audio * Dolby Digital Dolby Digital audio *...

  • Page 165: Gnu General Public License

    GPL/LGPL GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.

  • Page 166: Gnu Lesser General Public License

    It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
  • Page 167 However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library.
  • Page 168 d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

  • Page 169: List Of Remote Control Code

    TECHNICS ARCAM 0184 THORENS AUDIO RESEARCH 0184 THULE AUDIO TON 0184 UNIVERSUM 0184 AUDIOLAB 0184 VICTOR AUDIOMECA 0184 WARDS CAIRN 0184 YAMAHA CD RECORDER 0056 0184, 0206 KENWOOD 0653 0184 MARANTZ 0653 0027 PHILIPS 0653 YAMAHA 2400 0184 0900 DVD PLAYER...

  • Page 170: Tape Deck

    1281 INVIDEO THORENS 1216 UHER 0558 KATHREIN VENTURER 1417 VICTOR 0101 KREISELMEYER WARDS 0041, 0185 LABGEAR YAMAHA 0203, 1203, 1358, LOGIX 2601 LORENZEN (TUNER ID1) 2602 MAGNAVOX 0749, 0751 (TUNER ID2) 2603 MANHATTAN (XM ID1) 2604 (XM ID2) 2605 MARANTZ...
  • Page 171 CONTEC 0036, 0207 GRANADA CRAIG 0207 CROSLEY 0081 GRANDIN CROWN 0036, 0064, 0207, GRUNDIG 0397, 0445 CURTIS MATHES 0057, 0074, GRUNPY 0081, 0087, 0120, 0172, 0181, 0193, HALLMARK 0478, 0729, 1174, HANKOOK 1374 HANSEATIC DAEWOO 0036, 0057, 0064, 0119, 0135, 0181, HANTAREX 0197, 0205, 0207, HARMAN/KARDON 0081...
  • Page 172 SONTEC 0064 WATSON SONY 0027, 0677, 0861, WAYCON 1127, 1532, 1678 WHITE WESTINGHOUSE SOUNDESIGN 0205, 0207 SOUNDWAVE 0064, 0445 SOWA 0078, 0087, 0119, YAMAHA 0183, 0205 SQUAREVIEW 0198 STANDARD 0036 STARLITE 0207 STERN 0190, 0286 SUPREME 0027 YAPSHE SYLVANIA 0057, 0081, 0198...
  • Page 173 REPLAYTV 0641, 0643 VILLAIN 0068 WARDS ROADSTAR 0064, 0099, 0267, 0305 RUNCO 0066 WHITE WESTINGHOUSE 0108 0267 XR-1000 0108 YAMAHA 0069 YAMISHI SABA 0068, 0347 YOKAN SALORA 0070 YOKO SAMPO 0064, 0075 ZENITH SAMSUNG 0072, 0267, 0459 SANKY 0066, 0075...
  • Page 174 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

This manual is also suitable for:

Rxv2700blRx v2700 - av network receiver

Table of Contents