Table of Contents
Advertisement
Operation
1-4. Recording frames as dual pictures
(DUAL PICT)
1. Select the recording operation mode.
Select the recording operation on the RECORD
setup menu.
REC-MODE:
Select DUAL PICT.
INTERVAL:
When
DUAL
PICT
is selected as the REC-
MODE setting, the interval is canceled (- - : --:
sēļi
DIRECT-REC:
This is forcibly set to OFF.
REVIEW:
Select OFF if the recorded frame is not going to
be played back (reviewed) atter it was recorded.
Select 1SEC, 3SEC, 5SEC or 10SEC when the
frame
just recorded
it to be
played
back
(reviewed) for the selected duration after it has
been recorded.
REPEAT:
Set whether to initiate repeat recording when the
disc is set to the rewritable status. With the ON
setting, recording continues after the recording of
the final address by returning to the first frame
and recording the frames starting from address
1.
Repeat recording is ignored when the disc is set
to the write-once status.
. Start recording.
Capture the frame, which is to be displayed on the
left half of the screen, in the internal frame memory
from the INPUT mode using the FREEZE button.
Press the INPUT button again to enter the INPUT
mode, and then capture the frame which is to be
displayed on the right half of the screen.
At this
point, the frame has not yet been written on the disc
so that it can be re-captured any number of times.
A frame can be re-captured any number of times by
first selecting the left or right half of the screen
using the left or right arrow button and then using
INPUT and FREEZE.
If the frames for both sides of
the
screen
are
OK,
press
the
REC
button.
Recording now commences.
If REVIEW has been set, the frame will be played
for the selected
duration
upon
completion
of
recording, after which the INPUT mode will be
established.
28
1-5. Recording frames automatically by
specifying a time interval
(AUTO REC)
1. Select the recording operation mode.
Select the recording operation on the RECORD
setup menu.
REC-MODE:
. Select AUTO REC.
INTERVAL:
Set the recording time interval.
Refer to the cautions presented on the next
- page.
DIRECT-REC:
This is forcibly set to ON.
REVIEW:
Select OFF if the recorded frame is not going to
be played back (reviewed) after it was recorded.
Select 1SEC, 3SEC, 5SEC or 10SEC when the
frame
just recorded
is to be played
back
(reviewed) for the selected duration after it has
been recorded.
Refer to the cautions presented on the next
page.
REPEAT:
Set whether to initiate repeat recording when the
disc is set to the rewritable status. With the ON
setting, operation returns to the start after the
final address has been recorded, and automatic
recording continues from address 1. With the
OFF setting, frames are recorded to the end of
the disc, and then recording is ended.
Repeat recording is ignored when the disc is set
to the write-once status.
. Start the automatic recording.
Press the REC button.
The REC lamp flashes
while automatic recording is in progress.
. End the recording.
To end automatic recording, press the CLR button.
When the REPEAT setting is OFF or the disc is set
to the write-once status, automatic recording ends
at the point when frames have been recorded to the
end of the disc.
Advertisement
Table of Contents
