Table of Contents
Advertisement
General Introduction
1. Features
This is a digital frame (still-picture) recorder which
uses DVD-RAM
discs.
It features a high picture
quality, large capacity and high-level search, and a
high degree of reliability.
It can mainiy be used for the following kinds of
applications.
1) Image frame filing and presentation applications
in the medical and academic research fields
2) Still-picture
transmission
applications
in the
broadcasting field
3) Applications
involving
the
transmission
of
information for exhibitions, guides and directions
for buildings, electronic notice boards, etc.
4) Time lapse applications for monitoring objects,
people, etc.
High picture quality
The unit achieves a high picture quality which is
virtually free from any deterioration in this quality by
conducting non-compressed digital recording for the
video signals in the RGB mode or Component mode
— whichever suits the input signals. RGB recording
with a sampling frequency of 18 MHz/8 bits is featured
for the RGB input signals; component recording with a
sampling frequency of 13.5 MH2/8 bits is featured for
all other input signals.
Large-capacity recording
Large-capacity recording is enabled using DVD-RAM
discs with their large memory size.
Recording capacity per single-sided 2.6GB disc
e RGB mode: 1,680 frames
è Component
mode
(component,
VIDEO): 3,300 frames
composite,
S-
Voice memo recording and playback
Voice memos lasting 5 seconds can be recorded for
each frame.
A microphone and headphones are used to record
and play back the memos.
Automatic recording of date and time
The
recording
date
and
time
are automatically
recorded each time a frame is recorded.
It is also possible to record additional information such
as the ID or title for each frame.
Multi-screen playback
A
multiple
number
of frames
can
be
viewed
simultaneously
using
the
multi-screen
playback
function.
The screen can be divided into 4, 9 or 16
screens for multi-screen playback.
Search functions
In addition to direct searches by frame address,
frames can be searched by recording date and time or
ID.
The search results can be checked on the list
display or multi-screen display.
Seamless playback
The unit offers the convenience of seamless playback
where there are no breaks between the playback
frames and one frame is paves back after the next in
sequence.
(This function is available only in the Component
mode.)
. NEXT playback mode
The unit comes with the NEXT playback mode in
which the frame can be played back seamlessly while
the frame
to be played back
next is monitored
(previewed) at the monitor output connector. lt is also
possible
to replace the next
frame
with another
frame.(This
function
is available
only
in
the
Component mode.)
Pseudo write-once function
When a disc is to be formatted, it can be set to the
pseudo write-once status.
Once frames have been written, this status makes it
impossible for these frames to be erased, and it
prevents accidental erasure.
It also enables the unit
to be used as a playback-only unit (when the DIP
switch on the rear panel is set to establish this
function).
Program playback/automatic playback
Program playback is enabled by pre-registering the
frame playback sequence. Frames can also be played
back automatically in the sequence of their addresses.
This feature enables the unit to be used widely for
visual information exhibitions, presentations, etc.
Automatic recording
The unit can perform automatic recording (automatic
recording at intervals)which is useful for academic
research
applications
and time
lapse monitoring
applications.
Dual-picture recording
The unit is equipped with a DUAL PICT mode: this
mode enables the dual-picture frame to be recorded
after the input frames on two screens have been
combined into a single frame.
Advertisement
Table of Contents
