Table of Contents
Advertisement
Screen displays
7-1) Program input screen
The program input setting screen appears when the
cursor is aligned with <PROGRAM-INPUT>
on the
PROGRAM sub menu and the SET button is pressed.
This menu enables the program data to be registered
for the unit.
< PROGRAM
INPUT>
STEP
STEP
STEP
STEP
STĒP
STEP
STEP
STEP
STEP
000034
TO
000052
000006
000010
000100
001000
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
TO
000090
SELECT
c4
AV.
EXIT <MENU> / SAVE <SET>
Programs with up to 100 steps can be input.
A single address or the playback address range can
be set in each step as shown in the figure.
The playback address range can be in ascending or
descending order,
With a 000001 TO 000003 setting:
The
program
is played
back
in the order
of
addresses 1, 2 and 3.
With a 000003 TO 000001 setting:
The
program
is played
back
in the order
of
addresses 3, 2 and 1.
"UNDEF" is short for undefined.
53
<> How to input programs
Used to input numbers,
When the "+" button is pressed, the number is
incremented; conversely when the "-" button is
pressed, the number is decremented.
Left and right
arrow buttons
Used to change the input digit.
The cursor is moved toward lower digits by
pressing the right arrow button, conversely, it is
moved toward higher digits by pressing the left
arrow button.
By pressing the right arrow button when the
cursor is at one digit of a number, a playback
address range can be set.
CLR button
Used to clear the number input.
When the CLR button is pressed while a
playback address range is input, the single
address setting is established: when it is pressed
when a single address has been set, the UNDEF
(undefined) status is established.
000200 TO 000300
!
Press the CLR button.
000200
ļ
Press the CLR button.
UNDEF
Up and down
arrow buttons
Used to step scroll forward or backward through
the STEP display on the screen.
Steps 1 to 100 can be displayed and set.
SET button
Used to set the program which has been input
and to store it in the units memory.
MENU button
| Used to return operation from the program input
setting screen to the PROGRAM sub-menu.
Pressing this button without first pressing the
SET button will cancel the program which has
been input.
Advertisement
Table of Contents
