Table of Contents
Advertisement
Screen displays
< OUTPUT VIDEO = COMPOSITE (Component mode)
< VIDEO CONTROL >
P VIDEO-LEVEL
CHROMA-LEVEL
SETUP-LEVEL
HUE
SYS-H-PHASE
SYS-SC-COARSE
SYS-SC-FINE
0
0
Q
Q
0
Q
9
SELECT
<A V +->
EXIT <MENU>
Setting item (screen display)
Selectable modes
Description of function
| Video level seting
|
setting
|-127to+128 | This is used to adjust the video output level. ———
adjust the video output level.
All the parts of the composite output, monitor output and S-VIDEO output
except for the sync and burst are adjusted simultaneously.
When the video level is changed, the chroma level is also changed at the same
time.
The level is cleared to zero by pressing the CLR button.
(VIDEO-LEVEL)
Chroma level setting
~127 to +128
This is used to adjust the chroma output level.
(CHROMA-LEVEL)
All the chroma parts of the composite output except for the burst and of the
monitor output and S-VIDEO output except for the chroma are adjusted
Setup level setting
—128 to +127
(SETUP-LEVEL)
-127 to +128
simultaneously.
-127 to #128
The level is cleared to zero by pressing the CLR button.
0, 90, 180, 270
This is used to adjust the setup level. The composite output, monitor output
and S-VIDEO output are adjusted simultaneously.
The level is cleared to zero by pressing the CLR button.
Hue setting
(HUE)
This is used to set the output video hue. It is effective for the composite output,
monitor output and S-VIDEO output.
The setting is cleared to zero by pressing the CLR button.
System H phase setting
(SYS-H-PHASE)
This makes it possible to adjust the H phase of the interna! sync generator's
signal to the phase of the reference signal which is input from the external
source.
The setting is cleared to zero by pressing the CLR button.
System SC phase setting
(SYS-SC-COARSE)
This makes it possible to adjust the subcarrier (SC) phase of the internal sync
generator's signal to the phase of the reference signal which is input from the
external source.
The phase can be adjusted in four 90-degree steps.
AEI
O N
m
m I I I I
YSS
PG
YY
YY
YY YY???"
YS
TY FE"
ED
O
V
EN
O
M
YE
System SC phase setting
~127 to +128
This is used to adjust the phase finely in the continuous 90-degree range upon
(SYS-SC-FINE)
completion of the coarse setting.
Using the COARSE and FINE setting items, a continuous 360-degree range
can be covered.
59
Advertisement
Table of Contents
