Table of Contents
Advertisement
State: Released Date: 2021.03.01 22:19 GMT Effectivity: Upon Release
Click Service. The Service menu displays.
3.
In the DOC Service section of the Service menu, click Enter.
4.
5.
The DOC optical carriage moves all the way to the front and locks into
position for one minute. Rotation of the DOC rotary motor stops, and the
laser source turns off.
Remove the sizing cap from the end of the optical fiber connector cleaner
6.
(figure below).
Insert the cleaner into the center of the optical adapter in the DOC, ensuring
7.
that it seats fully, and press until it clicks. The cleaning material in the
optical fiber connector cleaner is moved over the optical connection.
Figure 8. Inserting Cleaner into Optical Adapter
8.
Remove the cleaner from the DOC.
OPTIS™ Integrated Next Operation and Maintenance Manual – 600173796 Rev. A
Cleaning and Maintenance
31
Advertisement
Table of Contents
