Dick SM-100 Operating Instructions Manual page 30

7
Operation
1
Figure 12 – Grinding a cutting tool
1. Clean the cutting tool before use.
2. Position the cutting tool on the machine so that the cutting edge [11-1]
points in the direction of rotation of the grinding belt [11-2].
3. Align the cutting tool horizontally so that it is positioned roughly
perpendicular [11-3] to the grinding belt.
4. Position the cutting tool blade [12-1] on the grinding belt at an angle of
approx. 15° [12-2].
5. When grinding, grind the sides of the cutting tool alternately until a burr
has formed over the entire cutting edge.
30 Operating Instructions SM-90/-100/-100W
[12-1]
[12-2]
2
Cutting tool blade
Positioning angle for the
cutting tool blade