Table of Contents
Advertisement
OPERATION
AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM,
a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt end cause excessive wear.
HOW TO PLUG IN THE POWER CORD
A DANGER: Improper
connection
of the equlpmant-grounding conductor ran
result in an Increased risk of electric shock.
Check with a quallited electrician or eer_ce-
man ff you am In do,Jbt as to Whcther the
product is properly grounded. Do not modify
the plug provided with the product--if it will
not fit the ouitct, have a proper outlet
Installed by a qualified elec_-Ian.
Your treadmill, like any other type of sophisticated
electronicequipment, can be seriouslydamaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
resultfrom weather conditionsor from other apphances
being turned on or off. To decrease the poeslblllty of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right),
To purchase a surge suppressor, see your local
PROFORM dealer or call toll-free 1-800-366-7278
and order part number 14657. Use only a single-out-
let surge suppressorthat is UL 1449 listed as a tran-
sient voltage surge suppressor ('I-VSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipationof
450 joules. The surge suppressor must be electrically
rated for 120 volts AC and 15 amps,
This product must be grounded. If _tshould malfunc-
tion or break down, groundingprovides a path of least
resistance for electnc current to reduce the risk of elec-
tric shock This productis equipped with a cord having
an equipment-groundingconductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor Into an appropriate
outlet that is properly Installed and grounded in
accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt clmult,
and has a groundingplug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing2 ifa properly
groundedoutlet is not available.
2
_Grounded
Outlet Box
_._
_
Surge Suppressor
L
_'_-..
TM
Grounding Pm_
Grounded Outlet
(3roundingPlug"_
-Grounded
Outlet Box
Adapter
^
l "_
_t'_-',_l
Surge _uppressor
Metal Screw
The temporary adapter should be used only until a
properlygrounded outlet (drawing 1) can be installed
by a qualified electnclan.
The green-colored rigidear, lug, or the hke extending
from the adapter must be connected to a permanent
ground such as a properlygrounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified eles-
trlclan to determine If the outlet box cover Is
grounded before using an adapter.
8
Advertisement
Table of Contents
