Advertisement
=,
=...
I_
"
OPERATION AND ADJUSTMENT
THE PERFORMANT
LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM,
a high-performance lubdcanL
IMPORTANT- Never apply silicone spray or other
substances
to the walking beR or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
HOWTO PLUG IN THE POWER CORD
electric shock• This product Is eq_ltpped_
a cord
having an equipment-grounding'conductor;anda
grounding plug. Plug the power cord into a surge
protector, and p!ug the surge protector into an ap-
propriat.e .outlet that is properly installed and
grounded In accordance with all local codes and
ordinances.
This product is for use on a nominal 120wolt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing I below. A temporary adapter that
looks like the adapter Illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a pmpedy grounded out-
let is not available.
The temporary adapter should be used only until a
pmpedy grounded outlet (drawing 1) can be installed
by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise Interference can re-
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos-
sibUity of your tread-
1
mill being damaged,
always use a surge
protector (not in-
cluded) with your
treadmill.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length•
This product must be
grounded. If it should
malfunction or break
down, grounding pro-
vides a path of least re-
sistance for electric cur-
rent to reduce the risk of
The green-colored dgid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a propady grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
Adapter
L
Metal Screw
Surge Protector
7
Advertisement
