Elcometer SAGOLA 4000 Instruction Manual page 34

an Elcometer company
In the case of any breakdown during the guarantee period, please attach the completed warranty
certificate to the unit and deliver this to the nearest Technical Assistance Service or get in touch
with the factory.
Any demand of greater importance against the supplier, in particular compensation for damages,
is excluded. This is also applicable to any damages that might arise during counselling, while
acquiring practice and during demonstration.
Consequently, the services rendered under guarantee do not involve an extension of the
warranty period.
The manufacturer reserves the right to make technical modifications.
20. Conformity Declaration
Manufactured: SAGOLA, S.A.U.
Address: Calle Urartea, 6 • 01010 VITORIA-GASTEIZ (Álava) SPAIN
Hereby declares that the product: FILTERING EQUIPMENT
Brand: SAGOLA
Range: 4000
Versions: Sagola 4120 / 4120 Plus / 4220 / 4220 Plus
UE Conformity declaration
In accordance with the Esential Security Provisions on the Annex of the Directive 2014/34/UE and it
can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (2006/42/CE) and the corresponding transposition into national law 1644/2008.
• UNE EN-1127-1:2012. Prevention and protection against explosion. Part 1: Basic concepts and methodology.
These also meets the following Directive and Regulations:
ATEX Directive (Directive 2014/34/CE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. The equipment must be connected to ground. All static electricity is discharged
through air pipes. The air hoses must be "STATIC-FREE"
• UNE EN ISO 80079-36:2017 / AC:2020
- Non electrical equipment used for potentially explosive atmospheres.
UKCA Conformity declaration
In accordance with the Esential Security Provisions on the Annex of the Directive
2016 No1107 and it can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (UKSI 2008 No.1597).
• BS EN-1127-1:2012. Prevention and protection against explosion. Part 1: Basic concepts and methodology.
These also meets the following Directive and Regulations:
ATEX Directive (Directive UKSI 2016 No 1107)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. The equipment must be connected to ground. All static electricity is discharged through air
pipes. The air hoses must be "STATIC-FREE"
BS EN 80079-36:2016. Explosive atmospheres. Non-electrical equipment for explosive atmospheres.
Basic method and requirements.
Full technical documentation and service instructions are available for 10 years.
In Vitoria-Gasteiz on 01/01/2024
EN 34
II 2G T4 x
Enrique Sánchez Uriondo
Director técnico
II 2G T4 x
Firmado:
www.sagola.com