Elcometer SAGOLA 4000 Instruction Manual page 33

The use
halogenated hydrocarbons (trichloroethane, methyl chloride,
etc.), may cause chemical reactions in the unit as well as in
its zinc-coated components (trichloroethane mixed with small
amounts of water produces hydrochloric acid). For this reason,
these components may rust and in extreme cases the chemical
reaction caused may be explosive. We recommend you to use
products that do not contain the aforementioned components.
Do not use acids, soda (alkalis or pickling substances, etc.) for
cleaning under any circumstances.
In general, precautions must be taken whenever the unit is handled, in order to prevent
any damage to this.
Connectors must be securely tightened and in good condition. If pneumatic connectors
are fitted, they must comply with the standard ISO 4414:2010.
Safety standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting
the physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
Always keep the safety sheets for the products to apply and the cleaning liquids to hand in case
you need to consult them.
17. Observations
By following the instructions set out in this manual you will ensure good quality of finish. Should
you have any doubt, please contact the Technical Service of SAGOLA.
18. Disposal
For complete and correct disposal of the unit, when it has reached the end of
its useful life, it must be completely dismantled so it can be recycled, separating
the metal and the plastics components.
19. Warranty Conditions
This device has been manufactured with great precision and has been subjected to a large
number of controls before leaving the factory.
The WARRANTY is valid for 3 years, counted as of the date of purchase, which will be indicated
by the seller in the place provided for this purpose, together with his stamp. Once the unit has
been received, please complete the warranty and send this to the manufacturer for validation.
This WARRANTY covers any manufacturing defect, which will be repaired without charge.
However, any malfunction resulting from the incorrect use of the unit, such as inadequate
connections, breakage due to dropping, or similar, the normal wear of components and in
general any deficiency not attributable to the manufacturer of the device, are expressly excluded.
Likewise, the WARRANTY shall be rendered null and void when it is evident that the unit
has been handled by persons other than our Technical Assistance Service.
This WARRANTY does not support any undertaking made by anyone outside our Technical
Service.
www.sagola.com
of solvents and/or
an Elcometer company
detergents that contain
EN 33