Table of Contents
Advertisement
6.
HOWTO START THE MAP
1) Turn the personal computer on and siart the MS-DOS.
Note:
Refer to the instruction manual of the personal computer for how to start computer.
2) Load the adjustment floppy disk in to disk drive A and press A: [ENTER].
(Display 1-1)
3) Press MAP_IBM [SPACE] 1 [ENTER].
(Display 1-2)
Note:
When you use a personal computer with two serial interface connectors and connect the DSP jig to serial interface
connector 2, press MAP_IBM 2.
4) Select the number accodding to the model. (Display 1-3)
If [ESC] (escape) is pressed, the display before the MAP starts (MS-DOS) is restored.
Notes: « If the required model is not found, press the P key and select the model from the next screen.
« If you select number without a model name by mistake, the message shown in "MESSAGE WHEN OPERATED
BY MISTAKE" will appear in the computer's display. (Display 1-4)
Press any key to return the display to MODEL SELECT dispaly.
5) Press ¥ key. (Display 1-5)
lf N key is pressed, the computer's display returns to MODEL SELECT display.
6) Refer to display 1-6.
7.
ADJUSTMENT PROCEDURE
Notes: « To complete adjustment, press the [ESC] (escape) key twice to restore the MS-DOS screen and then turn off the
camera/recorder and jig.
¢ The following describes an example of the instructions of the personal computer and the menu display; they are
different depending on the personal computer manufacturer and model.
Refer to the instruction manual of personal computer.
« When the error message appears during adjustment, refer to "8. Error Message".
If a key is pressed after an error message appears, the ADJUSTMENT MENU is restored.
Display & Figs
Display 1-1
Display 1-3
Display 1-5
CoA:
[0 HRI RRA
A RRR KEIRA RRA
RR RE III HIRE IR RR III IIH
[
Selected
model ISXXXXXXX
]
A:
MODEL SELECT
Are you sure ? (Y/N)
Display 1-2
[1]
XXXXXXX
Display 1-6
C>A:
[2]
XXXXXXX
MAIN MENU
CAS MAP-BA
1
[3]
XxXXXXXX
(KH KRKRR
RAKE
ERERR
RE AERA
ARR EHEEE
EERE
NER ERROR
[4]
XXXXXXX
MANUAL ADJUSTMENT
PROGRAM
[5]
xxXxxXXxKX
HKKKKREEKR KER KER KEKEEREREREK
EERE
REE EERIKKER
[P]
NEXT SELECTION
[A]
DATA MAINTENANCE
[ESC]
END
[B}
ADJUSTMENT
Please select the type of the set.
[C]
AUTO FOCUS
Press [1] - [5] or [P] or [ESC]
[D]
VCR ADJUSTMENT
[E]}
STABILIZER
Display 1-4
[F]
SPOT NOISE
MESSAGE WHEN OPERATED BY
[G]
LCD
MISTAKE
[H]
COLOR EVF
CAN NOT FIND THE DATA FILE
[ESC]
END
**** DRESS ANY KEY ****
J
Please select [A] - [H] or [ESC]
F3-5
Advertisement
Table of Contents
