Configure Controllability Of The Channels Via Plclock In The Em12D-Tmb Supply Module - E-T-A ControlPlex EM12D-TMB Instruction Manual

Byte [1]
Table 11: Configuration data of the EM12D-TMB intelligent supply module
Behaviour in the event of communication disruption:
Bit 1 unfreeze = 0 all load outputs (channels) of the circuit protectors are switched off and the EM12D-TMB
changes into the operating mode "independent operation".
freeze = 1 all load outputs (channels) of the circuit protectors remain in their current condition and the
EM12D-TMB changes into the operating mode "Independent operation".
Bit 2 power saving mode deactivated = 0
power saving mode activated = 1

7.3.9 Configure Controllability of the Channels via PLCLock in the EM12D-TMB Supply Module

Register 46004, readable, writable, functional code 3, 6 and 16.
The status PLCLock is fed back for all possible 16 channels via one word with one bit each representing the
status of a channel:
value range: Bit 0 - 15
data length: 1 word (unsigned integer)
Byte [0]
description
PLCLock channel 1
PLCLock channel 2
PLCLock channel 3
PLCLock channel 4
PLCLock channel 5
PLCLock channel 6
PLCLock channel 7
PLCLock channel 8
Byte [1]
description
PLCLock channel 9
PLCLock channel 10
PLCLock channel 11
28
bit 15 bit 14 bit 13
0/1
0/1
0/1
LEDs always have full illuminating power
LEDs have reduced illuminating power in the OK condition
bit 7 bit 6 bit 5
128 64 32
0/1
0/1
0/1
bit 15 bit 14 bit 13
32768 16384 8192
bit 12 bit 11 bit 10
0/1
bit 4 bit 3 bit 2
16 8 4
0/1
0/1
0/1
bit 12 bit 11 bit 10
4096 2048 1024
0/1
bit 9 bit 8
bit 1 bit 0
2 1
0/1
0/1
bit 9 bit 8
512 256
0/1
0/1