Table of Contents
Advertisement
7.1.
LEGAL NOTICES
The installer must read this instruction
manual carefully before installing the
machine.
The
installation
device must be carried out
by qualified and authorised
personnel, obeying all the
current safety and hygiene regulations.
7.2.
IMPORTANT WARNINGS
The operator must be a responsible
adult. Never a child nor someone without the
ability to accept that responsibility.
When handling the grinder, the following
precautions should be obeyed:
•
When removing the grinder from
the packaging, always pull it by the
handles of the bag.
•
Feet must not be bare.
•
Hands and feet must be dry.
•
Do not get the machine wet.
•
Do not expose the machine to direct
sunlight or other atmospheric agents.
•
Never insert any object into the coffee
inlet or outlet while the appliance is
running. (Please remember that when
the grinder stops, the burrs will keep
turning for a short while).
•
When unplugging the grinder, always
pull on the plug and never the power
cable to avoid a possible short circuit.
•
Care is needed when handling cutting
burrs during cleaning.
NOTE: This coffee grinder should
not be installed in places (SUCH
AS
INDUSTRIAL
where
are
cleaned using water jets or a
steam cleaner.
K09657H02 | PROC-CAL/002/03 USER MANUAL | V. 11/07/2023
of
the
KITCHENS)
expected
to
be
7.
INSTALLATION
7.3.
WHERE TO USE IT
The appliance must be installed on a
solid and flat surface.
The minimum size for the
working space, to ensure you
get the best performance from
the machine, must be the following:
Model
E5
E6/E8
535
620
Height
21
26,8
210
250
Width
8,3
9,8
335
405
Depth
13,2
16
•
Install the grinders on tables that are
completely level and in areas free from
external vibrations
•
Install the grinders in an area where
there are installations with a ground
connection.
•
Avoid places where abrupt changes in
temperature, humidity or airflow may
occur.
7.4.
INSTALLING THE COFFEE GRINDER
Before connecting the coffee grinder, check
the following:
•
The characteristics on the data plate
must match those of the electrical
mains network.
•
The
electrical
matches the socket into which it is to
be plugged.
•
Ensure that the electrical power of
the facility is adequate for the power
consumed by the appliance.
•
The point of connection to the electrical
mains network must be protected with
the appropriate electrical protection
device.
•
The equipment must be correctly
connected to a ground connection
according
to
the
regulations.
E10
mm
680
26,8
in
mm
250
9,8
in
mm
405
16
in
connection
plug
current
safety
11
Advertisement
Table of Contents
