15 inch s-series hmi
intel celeron bay trail-m n2930 1.83 ghz (96 pages)
Summary of Contents for Winmate GC Series
Page 1
7”~23.8” G-WIN Panel PC Intel® Celeron® Elkhart Lake N6211 Processor (up to 3.0 GHz) GC Series Model No. W07IE3S-GCT1 W07IE3S-GC01HB W10IE3S-GCH2 R12IE3S-GCM2(HB) W12IE3S-GCB1 R15IE3S-GCC3(HB) W22IE3S-GCA3 W24IE3S-GCA2 User Manual Document Version 1.0 Document Part No. 9152111I115N Please read these instructions carefully before using this product, and save this manual for future use.
G-WIN GC Series Panel PC Preface Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.
Page 5
Preface Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important:...
Page 6
G-WIN GC Series Panel PC For your safety carefully read all the safety instructions before using the device. Keep this user manual for future reference. Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.
Page 7
Preface Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids and Styrofoam. Use filed service tools, such as cutters, screwdrivers that are conductive. Always put drivers and PCB’s component side on anti-static foam. Important Information Federal Communications Commission Radio Frequency Interface Statement This device complies with part 15 FCC rules.
The documentation set for the IE32 GC Series Panel PC provides information for specific user needs, and includes: GC Series Panel PC User Manual – contains detailed description on how to use the panel PC, its components and features.
1.1 Overview Congratulations on purchasing Winmate® GC65 Panel PC. The elegantly designed, yet rugged, industrial grade G-WIN GC series is designed for heavy duty applications. With rugged construction, ultimate computing power, GC65 series are guaranteed to meet "heavy duty" needs.
G-WIN GC Series Panel PC 1.4 Product Overview 7”, W07IE3S-GCO1HB Dimension: 189.4 x 145.4 x 39.5 Unit: mm № № Description Description ① ④ 12V DC 1 x HDMI 2.0b ② 1 x RS232/422/485 ⑤ 2 x RJ45 ③ ⑥...
Page 11
Chapter 1: Introduction 10.1”, W10IE3S-GCH2 Dimension: 264.57x 173.29x 35.70 Unit: mm № № Description Description ① ④ 12V DC-in 1 x HDMI 2.0b ② ⑤ 1 x RS232/422/485 2 x RJ45 ③ ⑥ 2 x USB 3.2 Gen 2x 1 OSD Control Panel 12.1”, R12IE3S-GCM2(HB) Dimension: 296.2x 226.7x 45.5...
Page 12
G-WIN GC Series Panel PC 15”, R15IE3S-GCC3(HB) Dimension: 363.4 x 277.9 x 45.2 Unit: mm № № Description Description ① ④ 12V DC 1 x HDMI 2.0b ② ⑤ 1x RS232/422/485 2 x RJ 45 ③ ⑥ 2 x USB 3.2 Gen 2x 1 OSD Control Panel 19”, R19IE3S-GCM1...
Page 13
Chapter 1: Introduction 21.5”, W22IE3S-GCA3 Dimension: 530.2x 321.7 x 54.9 Unit: mm № № Description Description ① ④ 12V DC 1 x HDMI 2.0b ② 1 x RS232/422/485 ⑤ 2 x RJ 45 ③ ⑥ 2 x USB 3.2 Gen 2x 1 OSD Control Panel 23.8”, W24IE3S-GCA2 Dimension: 588x 358x 55...
G-WIN GC Series Panel PC 1.5 Physical Buttons and LED Indicators Physical buttons and LED indicators (OSD Control Panel) located on the rear side of the Panel PC. Physical Buttons Icon Button Description Reset Press to reset the system Press to power on or power off the...
Chapter 2: Getting Started Chapter 2: Getting Started This chapter tells you important information on power supply, adapter and precautions tips. Pay attention to power considerations. 2.1 Turning On and Off Your Device 2.1.1 To turn on your device: 1. Connect the Panel PC to the AC adapter. 2.
G-WIN GC Series Panel PC 2.2 Operating the Panel PC Winmate® GC65 Panel PC support several versions of Windows OS: -Windows 11 IoT -Windows 11 Pro -Windows 10 IoT -Linux Ubuntu 22.04. IMPORTANT: The device is shipped with the OS System according to your order. Contact us if you have any questions regarding OS settings.
Chapter 3: Operating the Device Chapter 3: Operating the Device In this chapter you will find an instruction on how operate the panel PC 3.1 Operating System G-Win GC SeriesFront IP65 Panel PC supports: - Windows 11 IoT Enterprise (64bit) (Optional) - Windows 11 Pro 64 bit (Optional) - Windows 10 IoT Enterprise (64bit) (Optional) - Linux Ubuntu 20.04 (Optional)
G-WIN GC Series Panel PC * Reference from Microsoft® Chapter 4: Installation This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. 4.1 Wiring Requirements The following common safety precautions should be observed before installing any electronic device: ...
Chapter 4: Installation 4.2 Connecting to Other Devices This section explains how to connect external interfaces to the Panel PC. 4.2.1 Power Connector DC Jack The Panel PC has DC jack connector for 12V DC-in power. Pin № Pin № Signal Name Signal Name DC_IN...
G-WIN GC Series Panel PC 4.2.3 RJ45 Connector The GC65 Panel PC has two RJ45 connectors that support 10/100/1000 Mbps Ethernet interface for connecting to the internet. Pin № Pin № Signal Name Signal Name TX1+ TX1- TX2+ TX2- TX3+...
5.1 RAM Mount Notice that only 7” model support RAM Mount to fit any vehicle application. *The picture is for demonstration purposes only. RAM Mount accessories are not supplied by Winmate.
G-WIN GC Series Panel PC 5.2 VESA Mount This device supports VESA Mount and provides various types of mounting options to fit any industrial use or vehicle. Size VESA Plate 7”, 10.1”, 12.1”,12.3” 75x75 mm 15”, 19”, 21.5”, 23.8” 100x100 mm 21.5”...
Chapter 5: Mounting 5.3 Panel Mount Panel Mount mounting solutions is suitable for many applications where Panel PC should be embedded. With this mounting solution flat surface leave no bezel in the front. Size Wall Cutout Screw Hole Diameter 7” 175.5 x 131.5, mm M4x4, mm 10.1”...
G-WIN GC Series Panel PC Chapter 6: Insyde H20 BIOS Setup This chapter describes the different settings available in the INSYDE BIOS that comes with the board. This chapter offers information on the Award BIOS installation utility. 6.1 Main Menu When you enter BIOS setup, the first menu that appears on the screen is the main menu.
Page 25
Chapter 6: Insyde H20 BIOS Setup BIOS Setting Description Setting Option Effect Language Displays system Adjustment of the Set the language in language. [English] is set language other language. The up by default. language in this device is English. System Time This is current time setting. Date time Set the time in the...
G-WIN GC Series Panel PC 6.2 Advanced Select the Advanced Tab from the setup menu to enter the advanced BIOS setup screen. You can select any of the items on the left frame of the screen to go to the sub menu for the item, such as CPU Configuration.
G-WIN GC Series Panel PC BIOS Setting Description Setting Option Effect Intel Hyper-Threading Technology allows a single Enable or disable Hyper Threading processor to execute two or Enable / Disable Hyper Threading more separate threads concurrently. Enable or disable AES...
G-WIN GC Series Panel PC 6.2.2.1 Restore On Power Loss In Restore On Power Loss, you can setup whether to restore the product automatically when the Power loss. 6.2.3 Hardware Monitor...
Chapter 6: Insyde H20 BIOS Setup 6.2.4 PCH-IO Configuration BIOS Setting Description Setting Effect Option PCI Express PCI Express clock gating enable/disable for each root Enter Opens sub- Configuration port. menu SATA And RST Enable/ Disable SATA device Enter Opens sub- Configuratuion menu USB Configuration...
Chapter 6: Insyde H20 BIOS Setup 6.2.7 USB Configuration 6.2.8 Power & Performance...
Page 34
G-WIN GC Series Panel PC BIOS Setting Description Setting Option Effect CPU – Power Configure CPU – Power Management Enter Opens sub-menu Management Control parameters BIOS Setting Description Setting Option Effect Boot Performance Configure Boot -Max non-turbo Select the performance state that...
Chapter 6: Insyde H20 BIOS Setup BIOS Setting Description Setting Option Effect -Turbo Mode Enable or disable Turbo Enabled/ Disabled Enable/ Disable processor Turbo Mode Mode (requires EMTTM enabled too). Auto means enabled, unless max turbo ratio is bigger than 16 – SKL AO W/A C states Enable or disable...
G-WIN GC Series Panel PC 6.2.11 Boot BIOS Setting Description Setting Option Effect Boot Type Boot Type UEFI Boot Type Select boot type to Dual type, Legacy type or configuration UEFI type Quick Boot Quick Boot Enabled Allows InsydeH20 to skip certain tests while configuration booting.
Chapter 6: Insyde H20 BIOS Setup 6.2.12 Boot Type Order BIOS Setting Description Setting Option Effect Hard Disk Type Hard Disk Type configuration Enter Opens Sub-menu Others Other configuration Enter Opens Sub-menu...
G-WIN GC Series Panel PC 6.2.13 Security BIOS Setting Description Setting Option Effect TrEE Protocol Version Choose TrEE Protocol TrEE Protovol Version: 1.0 or Version When hidden don’t exposes TPM Availability TPM Availability Available configuration TPM to 0 Hidden TPM Operation...
Chapter 6: Insyde H20 BIOS Setup 6.2.14 Power BIOS Setting Description Setting Option Effect ACPI S3 ACPI S3 configuration Disabled Enable/ Disable ACPI S1/S3 Sleep state Enabled Auto Wake on S5 Auto Wake on S5 Disabled Auto Wake on S5, by Day configuration or Month or fixed time of By Every Day...
Chapter 6: Insyde H20 BIOS Setup 6.3 Using Recovery Wizard to Restore Computer Note: Before starting the recovery process, make sure to backup all user data. The data will be lost after the recovery process. Important: Before starting the recovery process, remove any expansion card. To enable quick one-key recovery procedure: 1.
IE32 3.5” SBC. 7.1 Chipset Driver Follow instructions below to install Chipset driver. 1. Open the Driver (Download from Winmate Download Center) and select Chipset driver. When installation window will pop up, select Next.
Page 45
Chapter 7: Driver Installation 2. Select Accept to agree with the terms of license agreement. 3. Check the ReadMe file information, select Install to continue.
Page 46
G-WIN GC Series Panel PC 4. Wait for the driver to be installed. When installation completed, select Restart Now to restart your computer.
Chapter 7: Driver Installation 7.2 Graphic Driver Follow instructions below to install Graphic driver. 1. Open the Driver (Download from Winmate Download Center) and select Graphic driver. 2. Installation window will pop up, select Begin installation.
Page 48
G-WIN GC Series Panel PC 3. Select I agree. 4. Select Start to install the Driver.
Page 49
Chapter 7: Driver Installation 5. After installation is completed, click Finish.
G-WIN GC Series Panel PC 7.3 Management Engine (ME) Follow instructions below to install Management Engine (ME) . 1. Open the Driver (Download from Winmate Download Center) and select ME driver. 2. Select Next to start the installation.
Page 51
Chapter 7: Driver Installation 3. Select Next to agree with the terms of license agreement. 4. Wait for the driver to be installed. 5. When installation completed, select Finish complete installation.
Chapter 7: Driver Installation 7.4 SST Driver Follow instructions below to install SST driver. 1. Update Drivers > Browse “My computer” for driver software > Next 2. Wait for driver installation to complete. Please read these instructions carefully before using this product, and save this manual for future use.
Page 54
When the line-out volume is turned off, HDMI will also have no audio output. If you will not use the line-in function, please keep the Winmate default setting. When you need to use the line-in function, please follow the steps below to turn on the sync output.
G-WIN GC Series Panel PC 7.5 Audio Driver Follow instructions below to install Audio driver. 1. Open the Driver (Download from Winmate Download Center) and select Audio driver.
Page 57
Chapter 7: Driver Installation 2. Select Next to continue. 3. When installation completed, select Finish complete installation.
G-WIN GC Series Panel PC 7.6 Ethernet Driver Follow instructions below to install LAN driver. 1. Open the Driver (Download from Winmate Download Center) and select LAN driver.
Page 59
Chapter 7: Driver Installation 2. When compression is complete, select Next. 3. Read the license agreement, and then select Next.
Page 60
G-WIN GC Series Panel PC 4. Select the program you want to install and select Next. 5. Confirm the installation, select Install to start the installation.
Page 61
Chapter 7: Driver Installation 6. When installation is completed, select Finish to close the window.
G-WIN GC Series Panel PC 7.7 Watchdog Driver For more details about Winmate Watchdog, please download Watchdog Guide from Winmate Downloads Center: Follow instructions below to install Watchdog driver. 1. Type “cmd” in the run box then the cmd.exe will appear in programs.
Page 63
Chapter 7: Driver Installation 3. When Windows Security dialog appear, select install to continue the Installation. 4. Wait for installation to complete. When installation is complete, press any key to close.
Page 64
G-WIN GC Series Panel PC 5. Open the Driver and select Watchdog AP. 6. Select Next.
Page 65
Chapter 7: Driver Installation 7. The installed storage location is displayed, select Next to continue. 8. Select Next to start the installation. 9. When installation is completed, select Finish to close the window.
Chapter 7: Driver Installation 7.8 How to Enable Watchdog To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog in “Watchdog Guide” that you can download from Winmate Download Center or File Share. Refer to the User Manual for more details.
Page 68
G-WIN GC Series Panel PC 3. In Watchdog utility window set countdown time and periodically feed time, or disable watchdog. Setting Description The system automaticity restarts when this countdown time Watchdog Countdown Time reaches zero. Default: 10 min To set a cycle time to automatically reset watchdog timer.
Chapter 7: Driver Installation 7.9 Digital IO Driver For more details about Winmate Watchdog, please download Digital IO Guide from Winmate Downloads Center: Follow instructions below to install Digital IO driver. 1. Type “cmd” in the run box then the cmd.exe will appear in programs.
Page 70
G-WIN GC Series Panel PC 6. Open the Driver and select Digital IO AP.
Chapter 7: Driver Installation 7.10 Resistive Touch Driver for Windows 11 System Follow the instructions below to install the touch driver. 1. Click setup 2. Click Next to continue...
G-WIN GC Series Panel PC Chapter 8: Technical Support This chapter includes the directory for technical support. Free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products.