ControlByWeb WEBRelay-10+ User Manual page 28

System log file: syslog.txt
The syslog.txt file records various system events, which can be used for diagnostics and troubleshooting
purposes.
File Format:
MM/DD/YYYY HH:MM:SS, (category to which message applies): (message)
Sample File:
01/02/2010 04:08:13 DEVICE: Power Up.
01/01/2010 00:41:05 DEVICE: Reset factory defaults.
Listed below is a description of messages that a user may see:
Category: Message:
Power Up
Initialize
DEVICE
Reset Factory Defaults Device has been reset to factory defaults.
Failed DNS Lookup
Bad Username
Bad Password
EMAIL
Authentication
Required
No Response
RTC Reset
CLOCK
Request Attempt
Failed DNS Lookup
NTP SERVER
Success
Failed DNS Lookup
REMOTE Connection Attempt
SERVER Started
Connection Closed
Address Acquired
DHCP
Lease Renewal
New Firmware Loaded
MAIN_MCU
Xytronix Research & Design, Inc.
Description:
Device has been properly powered.
Device is ready.
Unable to lookup mail server due to an incorrect DNS setting.
Email was not sent due to an incorrect user name.
Email was not sent due to an incorrect password.
A user name and password are required by the mail server.
No response from SMTP server.
Real Time Clock has been reset.
Device attempting to connect to NTP Server.
Unable to lookup NTP server name due to an incorrect DNS setting.
Device successfully connected to NTP Server.
Unable to lookup Remote Server due to an incorrect DNS setting.
Connection port with Remote Server has ben opened.
Connection port with the Remote Server has been closed.
IP address request successful, and IP address assigned.
IP address assigned to device was renewed.
New firmware has been loaded to the device.
WebRelay-10 Plus™ Users Manual
Page 28