ControlByWeb WEBRelay-10+ User Manual page 26

Accessing Setup Pages
After changing ports, the setup pages are accessed on a local network as described below:
For example, to access the setup pages when the port is set to 8000, the following command would be
used:
To access the ControlByWeb™ devices from the Internet, enter the public IP address of the router plus
the port number of the desired device in the following format:
Using the example above, the following line would be used to access the setup page of the device:
Xytronix Research & Design, Inc.
http://(ControlByWeb Device's Local IP Address):(Port Number)/setup.html
http://192.168.1.25:8000/setup.html
http://(Public IP Address of Router):(Port Number of Device)/setup.html
http://203.0.113.254:8000/setup.html
WebRelay-10 Plus™ Users Manual
Page 26