PROEDGE
INSTRUCTION MANUAL
Make sure that the slider has been pushed all the
way and firmly press the button.
The LED indicator will flash red for app. 3
seconds
Confirm that the lock is locked properly but
moving/wiggling the slider as shown.
The ProEdge lock for flat doors works in the
exact same way as the shown corrugated
version.
MAINTENANCE AND CARE
• The ProEdge lock does not need any maintenance on a regular basis, and can be
cleaned with a cloth, water and mild soap.
• Do not attempt to disassemble the digital door lock by yourself. By doing so, you may
damage the product.
• Do not use force with a tool onto the product.
• Do not use any type of solvent to clean the product such as gasoline or benzene as
they can cause damage to electronic circuit, deterioration and/or paint peel-off.
• Do not use any other batteries other than what is specified in this manual.
• Do not pressure wash.
• Make sure to follow the above instructions to avoid any injuries and/or damage to the
product.
| OPERATION
T
R
Page - 23