Advertisement
Quick Links
Advertisement
Related Manuals for Assa Abloy ProEdge
Summary of Contents for Assa Abloy ProEdge
- Page 1 REPEATER & GATEWAY MANUAL 2024 VER 112723...
-
Page 2: Table Of Contents
PROEDGE Installation Manual For ProEdge Repeaters and Gateways TABLE OF CONTENTS Introduction ........................3 Required Tools / Specifications ...................4 Repeater Installation ....................6-8 Repeater Commissioning ..................8 Gateway Installation ....................9-10 Gateway Commissioning ..................10 Changelog ......................... 11 Warranty ........................12-13 Page - 2... -
Page 3: Introduction
Support: +1.866.240.7602 Web: ptisecurity.com Rev A – November 2023 INTRODUCTION This document describes the installation process of the ProEdge repeater(s) and gateway(s). Note: This document is for physical installation and commissioning of the ProEdge repeater and gateway. Note: This equipment has been tested and found to comply with the limits for a Class XX digital device, pursuant to part XX of the FCC rules and regulations. -
Page 4: Required Tools / Specifications
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL TOOLS REQUIRED FOR THE INSTALLATION Torx key set Drill bits for concrete/bricks Electrical drill Technical Specifications For Repeater For Gateway Power source Battery AC powered Rated voltage Rated current 300mA Battery type LM26500 Battery voltage Battery capacity 7.4AH... -
Page 5: Repeater Installation
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | REPEATER INSTALLATION This section will give the reader an introduction to installing a ProEdge repeater. The package for this ProEdge repeater contains: THE PACKAGE FOR THIS PROEDGE REPEATER CONTAINS: One (1) ProEdge Four (4) raw plugs... - Page 6 PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | REPEATER INSTALLATION NEW INSTALLATION OF REPEATER Note: Placement of the repeater must be performed by authorized personnel to ensure the best antenna conditions Place the repeater on the wall – and mark the 4 holes Drill the marked holes with a Ø? Drill bit...
- Page 7 PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | REPEATER INSTALLATION Position the repeater and mount the 4 screws with a torx key Note: All bolts and nuts must be tightened with a torque between 3 Nm and 5 Nm Unscrew the 4 screws and remove the lid Insert the battery The repeater is now ready for commissioning.
-
Page 8: Repeater Commissioning
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | REPEATER COMMISSIONING COMMISSIONING OF PROEDGE REPEATER To commence the commissioning process, launch the StorSynx application, designed specifically for commissioning purposes. • Log in using existing StorLogix Cloud (SLC) user credentials, or if no user has been created yet, proceed to create one (can be done in the SLC platform only). -
Page 9: Gateway Installation
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | GATEWAY INSTALLATION NEW INSTALLATION OF GATEWAY This section will give the reader an introduction to commissioning the ProEdge gateway. THE PACKAGE FOR THIS PROEDGE GATEWAY CONTAINS: One (1) ProEdge One (1) power gateway... -
Page 10: Gateway Commissioning
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | GATEWAY COMMISSIONING COMMISSIONING OF THE PROEDGE GATEWAY Navigate to the “Devices list” page within the mobile application, select the “Gateways” section, and initiate the addition procedure by clicking the “Add Gateway” button. Currently, there are two available options for adding Gateway: 1. -
Page 11: Changelog
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL | CHANGELOG Changelog Date Change 11-27-2023 New document Page - 11... -
Page 12: Warranty
PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL WARRANTY & DISCLAIMER PTI Security Systems warrants its products and equipment to conform to its own specifications and to be free from defects in materials and workmanship, under normal use and service, for a period of one year from the date of shipment. - Page 13 PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL Warning: The User should follow all installation, operation, and maintenance instructions. The User is strongly advised to conduct Product and systems test at least once each week. Changes in environmental conditions, electric or electronic disruptions, and tampering may cause the Product to not perform as expected.
- Page 14 PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL Page - 14...
- Page 15 PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL Page - 15...
- Page 16 PROEDGE REPEATERS & GATEWAYS INSTALLATION MANUAL Page - 16...
- Page 17 With PTI Security Systems, operators can easily customize all of their facility’s access areas, review site activity, and monitor zones and alarms from one cloud- based account. Create a world-class operation with the most advanced enterprise access control solution from the trusted industry leader with over 40 years of experience.