Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Assa Abloy ProEdge
Summary of Contents for Assa Abloy ProEdge
- Page 1 INSTALLATION MANUAL 2024 VER 112723...
-
Page 2: Table Of Contents
PROEDGE Installation Manual TABLE OF CONTENTS Introduction ........................3 Required Tools / Specifications ...................4 Corrugated Doors Installation ................5-10 New Installations ....................6-8 Retrofit Installations ...................9-10 Flat Door Installlations ..................11-17 New Installations ....................12-16 RetroFit Installations ..................17-19 Commissioning ......................20-21 Changelog ......................... 22 Warranty ........................23-24... -
Page 3: Introduction
Sales: +1.800.523.9504 Support: +1.866.240.7602 Web: ptisecurity.com Rev A – November 2023 INTRODUCTION This document describes the installation process of the ProEdge Smart Lock for the following door configuration(s): Corrugated doors: ¨ Mini Door Series: 650, 650I, 690, 750 and 850... -
Page 4: Required Tools / Specifications
PROEDGE Smart Lock INSTALLATION MANUAL TOOLS REQUIRED FOR THE INSTALLATION Allen key set ProEdge Mounting Not Pictured tool (SKU:XXX) Electrical drill 10mm socket incl wrench Drillbits (Preferably HSS for metal) Technical Specifications Battery type LM17500 Battery voltage Battery capacity Battery lifetime... -
Page 5: Corrugated Doors Installation
PROEDGE Smart Lock INSTALLATION MANUAL | CORRUGATED DOORS The following sections will give the reader an introduction to installing a ProEdge Smart Lock on a corrugated door for new builds and retrofits. THE PACKAGE FOR THIS PROEDGE SMART LOCK CONTAINS:... -
Page 6: New Installations
PROEDGE Smart Lock INSTALLATION MANUAL | CORRUGATED DOORS NEW INSTALLATION ON CORRUGATED DOORS Measure from bottom of door to centerline of the four (4) holes: 1000mm. Mark the four (4) holes for the latch as per specifications. With an electrical drill and drill bit Ø7mm, drill the four (4) holes in the door. - Page 7 PROEDGE Smart Lock INSTALLATION MANUAL | CORRUGATED DOORS Mount the four (4) M6 carriage bolts. Mount the washers and nuts on the backside. Note: All bolts and nuts must be tightened with a torque between 7Nm and 9Nm. Apply the filt over the nuts to prevent any scratching.
- Page 8 PROEDGE Smart Lock INSTALLATION MANUAL | CORRUGATED DOORS Test the slider movement for any possible collisions. The lock is now ready for comissioning. Page - 8...
-
Page 9: Retrofit Installations
INSTALLATION MANUAL | CORRUGATED DOORS RETROFIT INSTALLATION ON CORRUGATED DOOR As earlier describes, the ProEdge Smart Lock can be retrofitted on C-486 latches using the same bolt pattern. Put the lock in the “unlocked” position. Mount the four (4) M6 carriage bolts. - Page 10 PROEDGE Smart Lock INSTALLATION MANUAL | CORRUGATED DOORS Apply the filt over the nuts to prevent any scratching. Test the slider movement for any possible collisions. The lock is now ready for commissioning. Page - 10...
-
Page 11: Flat Door Installlations
PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS The following sections will give the reader an introduction to installing a ProEdge Smart Lock on a flat door for new builds and retrofits. THE PACKAGE FOR THIS PROEDGE SMARTLOCK CONTAINS: (1) ProEdge... -
Page 12: New Installations
PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS NEW INSTALLATION ON FLAT DOORS Measure from bottom of door to centerline of the 2x holes: 1000mm. Mark the 2x holes for the latch as per specifications to the edge of the door 1000 (Yellow line). - Page 13 PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS From the back of the door, put the M6 bolts through the washers and door From the front of the door, mount the spacers and lock Tighten the bolts Note: All bolts and nuts must be...
- Page 14 PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS Put the Strike plate on top of the slider Align the strike horizontally – it must be flush with the end of the slider Page - 14...
- Page 15 PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS Align the strike horizontally – it must be centered Mark the 2x holes Remove the strike and drill with a 7mm drill Page - 15...
- Page 16 PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS Note: All bolts and nuts must be tightened with a torque between 10Nm and 12Nm Make sure the slider can slide with no collisions The lock is now ready for commissioning Page - 16...
-
Page 17: Retrofit Installations
PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS RETROFIT INSTALLATION ON A FLAT DOOR Demount the 2x M6 bolts, washers and spacers From the back of the door, put the M6 bolts through the washers and door From the front of the door, mount the... - Page 18 PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS Put the lock in the “locked” position Note: All bolts and nuts must be tightened with a torque between 10Nm and 12Nm Page - 18...
- Page 19 PROEDGE Smart Lock INSTALLATION MANUAL | FLAT DOORS Make sure the slider can slide with no collisions The lock is now ready for commissioning Page - 19...
-
Page 20: Commissioning
PROEDGE Smart Lock INSTALLATION MANUAL | COMMISSIONING To commence the commissioning process, launch the StorSynx application, designed specifically for commissioning purposes. • Log in using existing StorLogix Cloud (SLC) user credentials, or if no user has been created yet, proceed to create one. (can be done in the SLC platform only). - Page 21 PROEDGE Smart Lock INSTALLATION MANUAL • Ensure, that the Lock is awakened, and if not wake it up. • Click the “Submit” button in the mobile application. • Wait for the pairing to complete. • Try again, if the process failed, or try to get the logic of the failed process from software engineers (after the Logs feature is implemented).
-
Page 22: Changelog
PROEDGE Smart Lock INSTALLATION MANUAL | CHANGELOG Changelog Date Change 11-27-2023 New document Page - 22... -
Page 23: Warranty
PROEDGE Smart Lock INSTALLATION MANUAL WARRANTY & DISCLAIMER PTI Security Systems warrants its products and equipment to conform to its own specifications and to be free from defects in materials and workmanship, under normal use and service, for a period of one year from the date of shipment. - Page 24 PROEDGE Smart Lock INSTALLATION MANUAL Warning: The User should follow all installation, operation, and maintenance instructions. The User is strongly advised to conduct Product and systems test at least once each week. Changes in environmental conditions, electric or electronic disruptions, and tampering may cause the Product to not perform as expected.
- Page 25 With PTI Security Systems, operators can easily customize all of their facility’s access areas, review site activity, and monitor zones and alarms from one cloud- based account. Create a world-class operation with the most advanced enterprise access control solution from the trusted industry leader with over 40 years of experience.