Trolley Compatibility; It Security Measures - BD Alaris Directions For Use Manual

Gateway workstation
Table of Contents

Advertisement

Trolley Compatibility

All Alaris™ Gateway Workstation configurations are compatible with the Alaris™ Gateway Workstation Trolley
80203UNS00-00 .
• Height of the Workstation with bag supports in the lowered position where appropriate . Bag supports can extend by
a further 500mm above the Workstation .
• Includes Pumps, Syringe Pumps with lockboxes and 1 litre fluid bags on each bag support . Note, all weights derived
from lockbox weight . Refer to the Alaris™ CC/GH Syringe Pump DFU for more information on lockbox .
• Total VA Rating for two connected Workstations should not exceed 460VA (includes combinations of Pumps within
leakage current limits) .
• Installation should be as low as possible . Refer to 1000PB01717 latest issue for maximum mounting heights .

IT Security Measures

The Alaris™ Gateway Workstation has an Ethernet service port (Workstation Configuration Connector, Auxiliary Connector)
that is used to configure the Workstation settings, such as wired networking configuration . To adjust these settings, a
computer with a compatible web browser (Internet Explorer or Google Chrome) is required to connect to the Workstation
using the Ethernet service port . Access to the configuration interface (portal) is password protected .
When the Workstation is first set up, a default user ID and password are used for initial configuration of the device .
When the Workstation is set up, user accounts and passwords can be set up on role-based lines to control access to the
Continuous Quality Improvement (CQI) data on the devices .
For further details, refer to 'Wired Networking' .
BDDF00794 Issue 4
Alaris™ Gateway Workstation v1.3.x
Product Specifications
40/46

Advertisement

Table of Contents
loading

Table of Contents